33152430100010 データシートの表示（PDF） - HARTING

部品番号

コンポーネント説明

メーカー

33152430100010

HARTING har-flex® connectors

HARTING 

Mating conditions

Inclination

Mismating

Technical characteristics

SMT processing notes

The har-flex® SMT con-

nectors meet the highest

­demands in terms of their

processing capabilities.

The connectors are delivered

in a tape and reel packag-

ing optimized for a­utomatic

­ assembly machines. A

vacuum cover enables the

automatic assembly with a

vacuum nozzle.

The insulation body material is high temperature resistant, and

due to the black colour a secure camera recognition is ensured.

For a reliable SMT solder process, the termination pins are

100 % checked for coplanarity.

Process / Moisture Sensitivity

During the reflow solder process, the connector has to resist ex-

treme variations in temperature. Connectors consist in general

of both plastic and metal parts, which have a different behaviour

during the solder process. The Process Sensivity and also the

Moisture Sensivity are tested according the ECA/IPC/JEDEC

J-STD-075 specification.

Process Sensivity:

PSL means Process Sensitivity Level. PSL is a rating used to

identify a component that is solder process sensitive. Damages

of the connector after three times soldering are not permitted

(e.g. melted edges).

Moisture Sensitivity:

MSL means Moisture Sensitivity Level. MSL is a rating indicat-

ing a component’s susceptibility to damage due to absorbed

moisture during storage. Damages of the connector after stor-

age in damp heat and three times soldering are not permitted

(e.g. blisters).

The har-flex® connectors are rated with PSL R0 and MSL 1.

This is the maximum possible rating in both categories. The

har-flex® connector resists three times soldering at the following

conditions without damages:

• min. 150 s beyond 217 °C (liquidus temperature, the melting

point of the solder paste)

• min. 30 s beyond classification temperature (240 °C / 245 °C

for har-flex®)

• Temperature solder profile according to ECA/IPC/JEDEC

J-STD-075

• For MSL test, a storage of 168 hours at 85 °C and 85 % rel.

humidity was carried out

As the result, the har-flex® connectors are not process sensi-

tive and not moisture sensitive according to ECA/IPC/JEDEC

J-STD-075.

13

Share Link: