HIF3B-6PA-2.54DS データシートの表示（PDF） - HIROSE ELECTRIC

部品番号

コンポーネント説明

メーカー

HIF3B-6PA-2.54DS

Ribbon Cable connector Compliant with MIL Standard

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHHS pIFro3duBctsShearveiebsee●n RdisicbobntoinnuedC, oarbwliell bceodinscnoentcintuoedrsCooon.mPlpealsieacnhtecwk iththe pMroIdLucStstsatantdusaorndthe Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

BSocket Side (Crimping) Assembling Procedures

(1) As shown in Figure 1, peel the applicable cable (AWG#20 to #26) jacket, and connect it using crimping jig HIF3-TA2022HC,

HIF3-TA2226HC, or HIF3-TA2426HC. In this case, insert the cable so as to hit the contact cable stripper position as shown

Figure 2.

(2) After connection as shown Figure 2, check the contact direction, and insert the contact as shown Figures 3 and 4. Slightly pull

the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (A).

Note1 : For handling procedures for special crimping tools, refer to the "Handling Instruction Manual".

Note2 : Wire strip length: Refer to crimp condition sheet.

Wire strip length

Figure 1

Figure 2

Figure 3

B34

Figure 4

Share Link: