M38C25FFDFP データシートの表示（PDF） - MITSUBISHI ELECTRIC

部品番号

コンポーネント説明

メーカー

M38C25FFDFP

SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

MITSUBISHI ELECTRIC  

PRELIMINARY NSootimcee: pTahriasmisentroict alimfinitsalasrpeescuifbicjeactitotno. change.

MITSUBISHI MICROCOMPUTERS

38C2 Group

SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

PIN DESCRIPTION

Table 1 Pin description (1)

Pin

VCC, VSS

VREF

AVSS

RESET

XIN

XOUT

VL3

COM0 –

COM3

P00/SEG0 –

P03/SEG3

P04/SEG4 –

P07/SEG7

P10/SEG8 –

P17/SEG15

P20/SEG16 –

P25/SEG21

P26/SEG22/VL1

P27/SEG23/VL2

P30/SRDY2

P31/SCLK2

P32/TxD2

P33/RxD2

P34/INT2

P35/TXOUT

P36/T2OUT/φ

P37/CNTR0

P40/OOUT0/AN0

P41/OOUT1/AN1

P42/AN2–

P45/AN5

P46/RTP0/AN6

P47/RTP1/AN7

P50/INT0

P51/INT1

P52/T3OUT/PWM0

P53/T4OUT/PWM1

P54/RxD1

P55/TxD1

P56/SCLK1

P57/SRDY1

Name

Power source

Analog reference

voltage

Analog power source

Reset input

Clock input

Clock output

LCD power

source

Common output

I/O port P0

I/O port P1

I/O port P2

I/O port P3

I/O port P4

I/O port P5

Function

• Apply voltage of 1.8 V to 5.5 V to VCC, and 0 V to VSS.

• Reference voltage input pin for A-D converter.

Function except a port function

• GND input pin for A-D converter. Connect to VSS.

• Reset input pin for active “L.”

• Input and output pins for the main clock generating circuit.

• Feedback resistor is built in between XIN pin and XOUT pin.

• Connect a ceramic resonator or a quartz-crystal oscillator between the XIN and XOUT pins to

set the oscillation frequency. When an external clock is used, connect the clock source to XIN,

and leave XOUT pin open.

• Input 0 ≤ VL1 ≤ VL2 ≤ VL3 ≤ VCC voltage.

• Input 0 – VL3 voltage to LCD.

• LCD common output pins.

• COM2 and COM3 are not used at 1/2 duty ratio.

• COM3 is not used at 1/3 duty ratio.

• 8-bit I/O port.

• CMOS compatible input level.

• LCD segment

output pins

• Key input interrupt

pins

• CMOS 3-state output structure.

• I/O direction register allows each port to be individually

programmed as either input or output.

• Pull-up control is enabled.

• LCD power source

input pins

• Serial I/O2 function pins

• External interrupt pin

• Timer X, Timer 2 output pins

• Timer X function pin

• AD converter input • Oscillation external

pins

output pins

• Real time port

function pins

• External interrupt pins

• Timer 3, Timer 4 output pins

• PWM output pins

• Serial I/O1 function pins

• Key input interrupt input pins

3

Share Link: