S-24C08CH データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

S-24C08CH

FOR AUTOMOTIVE 105°C OPERATION 2-WIRE SERIAL E2PROM

Unspecified 

Rev.3.0_01_H

FOR AUTOMOTIVE 105°C OPERATION 2-WIRE SERIAL E2PROM

S-24C08C H Series

 Initial Delivery State

Initial delivery state of all addresses is "FFh"

 Operation

1. Start condition

Start is identified by a high to low transition of the SDA line while the SCL line is stable at high.

Every operation begins from a start condition.

2. Stop condition

Stop is identified by a low to high transition of the SDA line while the SCL line is stable at high.

When a device receives a stop condition during a read sequence, the read operation is interrupted, and the device

enters standby mode.

When a device receives a stop condition during a write sequence, the reception of the write data is halted, and the

S-24C08C initiates a write cycle.

tSU.STA tHD.STA

tSU.STO

SCL

SDA

Start Condition

Figure 9 Start / Stop Conditions

Stop Condition

9

Share Link: