ATS616LSG データシートの表示（PDF） - Allegro MicroSystems

部品番号

コンポーネント説明

メーカー

ATS616LSG

Dynamic Self-Calibrating Peak-Detecting Differential Hall Effect Gear Tooth Sensor IC

Allegro MicroSystems 

ATS616LSG

Dynamic Self-Calibrating Peak-Detecting Differential

Hall Effect Gear Tooth Sensor IC

Package SG

F

2.20

E

8.00±0.05

5.80±0.05

4.70±0.10

E1

1.70±0.10

1 23 4

E2

A

0.60±0.10

Branded

Face

0.71±0.05

24.65±0.10

15.30±0.10

0.40±0.10

5.50±0.05

B

0.38

+0.06

–0.04

LLLLLLL

NNN

YYWW

D Standard Branding Reference View

= Supplier emblem

L = Lot identifier

N = Last three numbers of device part number

Y = Last two digits of year of manufacture

W = Week of manufacture

For Reference Only, not for tooling use (reference DWG-9002)

Dimensions in millimeters

A Dambar removal protrusion (16X)

B Metallic protrusion, electrically connected to pin 4 and substrate (both sides)

C Thermoplastic Molded Lead Bar for alignment during shipment

D Branding scale and appearance at supplier discretion

E Active Area Depth, 0.43 mm

F Hall elements (E1, E2), not to scale

1.0 REF

A

1.60±0.10

1.27±0.10

5.50±0.10

0.71±0.10

C

0.71±0.10

Copyright ©2005-2009, Allegro MicroSystems, Inc.

Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to per-

mit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the

information being relied upon is current.

Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the

failure of that life support device or system, or to affect the safety or effectiveness of that device or system.

The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use;

nor for any infringement of patents or other rights of third parties which may result from its use.

For the latest version of this document, visit our website:

www.allegromicro.com

Allegro MicroSystems, Inc.

14

115 Northeast Cutoff

Worcester, Massachusetts 01615-0036 U.S.A.

1.508.853.5000; www.allegromicro.com

Share Link: