AD797BRZ-REEL71 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
제조사
AD797BRZ-REEL71 Datasheet PDF : 20 Pages
| |||
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Supply Voltage
Internal Power Dissipation @ 25°C1
PDIP
SOIC
Input Voltage
Differential Input Voltage2
Output Short-Circuit Duration
Storage Temperature Range
(N, R Suffix)
Operating Temperature Range
Lead Temperature Range
(Soldering 60 sec)
Ratings
±18 V
1.3 W − (TA − 25°C)/θJA
0.9 W (TA − 25°C)/θJA
±VS
±0.7 V
Indefinite within
maximum internal
power dissipation
−65°C to +125°C
−40°C to +85°C
300°C
1 θJA = 95°C/W for the 8-lead PDIP; 155°C/W for the 8-lead SOIC.
2 The AD797 inputs are protected by back-to-back diodes. To achieve low
noise, internal current-limiting resistors are not incorporated into the design
of this amplifier. If the differential input voltage exceeds ±0.7 V, the input
current should be limited to less than 25 mA by series protection resistors.
Note, however, that this degrades the low noise performance of the device.
AD797
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. F | Page 5 of 20
Share Link: 