ASDX005D44H(2008) 데이터 시트보기 (PDF) - Honeywell International

부품명

상세내역

제조사

ASDX005D44H
(Rev.:2008)

Pressure Sensors 0 psi to 1 psi through 0 psi to 100 psi

Honeywell International 

ASDX Series

Pressure Sensors

0 psi to 1 psi through

0 psi to 100 psi

DESCRIPTION

The ASDX Series is an amplified version of Honeywell’s

proven performer and industry leading SDX Series sensor. The

ASDX sensor’s footprint is slightly larger than the SDX;

however, it offers a high level output (4.0 Vdc span) on a very

cost-effective basis. This series is fully calibrated and

temperature compensated with on-board Application Specific

Integrated Circuitry (ASIC).

These DIP (Dual In-line Package) sensors are designed for

use with non-corrosive, non-ionic working fluids; such as air

and dry gases.

FEATURES

• ASIC-enhanced output

• Wide compensated temperature range 0 °C to 85 °C

[32 °F to 185 °F]

• Available in absolute, differential and gage types

• Pressure ranges from 0 psi to 1 psi through 0 psi to 100 psi

• Accuracy ±2.0% max. V full scale

• Quantization step of 3 mV

• Response time of 8 ms

Sensors are available to measure absolute, differential and

gage pressures. The absolute sensors have an internal

vacuum reference and an output voltage proportional to

absolute pressure. The differential sensors allow application of

pressure to either side of the sensing diaphragm and may used

for differential or gage measurements. Bidirectional versions

are also available.

All ASDX Series sensors are accurate to within ±2.0% full

scale and are designed for operation from a single 5.0 Vdc

supply.

POTENTIAL APPLICATIONS

• Flow calibrators

• Ventilation and air flow monitors

• Gas flow instrumentation

• Dialysis equipment

• Sleep apnea monitoring and therapy equipment

• Barometry

• HVAC controls

• Pneumatic controls

Share Link: