C9329 데이터 시트보기 (PDF) - Hamamatsu Photonics

부품명

상세내역

제조사

C9329

Photosensor amplifier

Hamamatsu Photonics 

Photosensor amplifier C9329

s Typical connection to photodiode

This is an example using a photodiode whose cathode is

internally connected to its metal package.

When you use a photodiode metal package, use an insu-

lator to electrically insulate and also hold the package in

a shield case as shown in the figure at right. Connect the

anode to the shield case.

Any single-element photodiode with a terminal capaci-

tance below 5000 pF can be used.

Using a photodiode with anode grounded is recom-

mended.

Using a photodiode with a BNC connector (S2281 se-

ries) allows you to easily make measurements because it

connects to C9329 with a BNC-BNC plug coaxial cable.

PHOTODIODE

ANODE

SOLDER

Connect to C9329 terminal

CATHODE

COAXIAL CABLE WITH BNC PLUG

INSULATOR EXTERNAL SHIELD CASE

KACCC0221EA

Anode: Connect to the shield wire of the cable and shield case.

Cathode: Connect to the core wire of the cable.

s Connection example

Operation example by digital output (REMOTE MODE)

s Display example of accessory sample software

COAXIAL CABLE

WITH BNC-BNC PLUG RS-232C CABLE

PC

PHOTODIODE

(S2281 SERIES)

to IN

TERMINAL

to RS-232C

TERMINAL

to DC TERMINAL

SWITCH C9329

REAR SW TO

"REMOTE MODE"

AC ADAPTER

(Need not be connected

when operating on battery)

Rf RANGE SWITCH

KACCC0222EA

Note: Use the Rf RANGE switch to change the detection sensitivity.

(Detection sensitivity cannot be changed from the PC.)

s Dimensional outline (unit: mm, excluding project parts)

90 ± 1

FRONT

Rf RANGE ZERO ADJ. DATA LOG.

H

AUTO ZERO

POWER

ON

M

L

PUSH START

PHOTOSENSOR AMPLIFIER C9329

REAR

MANUAL

REMOTE

MODE

MODE

OUT

IN

UPPER SURFACE

Data logger setting range

Measurement interval: 50 ms to 1 min

(50 ms interval)

Measurement count: 32000 Max.

Measurement interval × Meassurement count:

20 hours Max.

DC JACK

RS232C

DC12V EIAJ ONLY FOR REMOTE MODES

s Accessories

・AC adapter (Plug type: A-2 plug) *5

・Dry battery

・Sample software CD-ROM (OS: Windows98SE/Me/2000/Xp *6）

・Instruction manual

KACCA0137EA

*5: Caution) Depending on the country, an adapter plug might be required when connecting to the AC outlet.

If so, please purchase a proper adapter plug from an electronics supply house.

*6: Resistered trademark of Microsoft Corporation in the United States.

Photodiode, coaxial cable with BNC-BNC plug and RS-232C cable are not supplied with C9329. You will need an RS-232C

cable (straight cable terminated with a D-sub 9 pin female connector at both ends) available from electronics supply houses.

2

Share Link: