M61316SP 데이터 시트보기 (PDF) - Renesas Electronics
부품명
상세내역
제조사
M61316SP Datasheet PDF : 27 Pages
| |||
M61311SP/M61316SP
VD-NV V-DET Input Maximum Noise Voltage
Increase the SG1 input level gradually from 0 VP-P to 0.05 VP-P. No pulse Video Det OUT permitted.
VD-SV V-DET Minimum Input Voltage
Decrease the SG1 input level gradually from 0.2 VP-P to 0.3 VP-P. Positive pulse has occurred to Video Det OUT.
VVDH V-DET Output High Level
Measure the high voltage at Video Det OUT. The measured value is treated as VVDH.
VVDL V-DET Output Low Level
Measure the low voltage at Video Det OUT. The measured value is treated as VVDL.
TDV-F V-DET Output Delay Time1
Video Det OUT becomes high with signal part of SG1.
Measure the time needed for the SG1 to fall from 50% and for Video Det OUT to fall from 50% with an active probe.
The measured value is called TDV-F.
TDV-R V-DET Output Delay Time2
Video Det OUT becomes high with signal part of SG1.
Measure the time needed for the SG1 to rise from 50% and for Video Det OUT to rise from 50% with an active probe.
The measured value is called TDV-R.
SG1 Video (50%)
Video Det OUT
TDV-R
(50%)
Pedestal voltage
TDV-F
REJ03F0199-0201 Rev.2.01 Mar 31, 2008
Page 15 of 26
Share Link: 