Reliability Test
SRM-354VF
Test items
Test condition
Remarks
High temp & High humid
Ta=40℃, RH=90%, t=96Hr’s
#1, 2
Heat cycle
#2, 3
-
Fall test
#4
-
#1. Supply voltage 5V at the load test.
#2. Electro-optical characteristics shall be satisfied after 2hr’s at normal temperature.
#3. Heat cycle test as below Fig2. For 20 cycles under no load.
Fig 2. Heat cycle test
#4. Fall test
The test devices to fall three time onto hard wooden board from a level 75 ㎝
The others
In case of noisy power supply, please serially insert about 47Ω resistance an about 47 ㎌
electrolytic capacitance in line as follows.
Remocon
Preamp
KMM-1002-000
5