A3959
DMOS Full-Bridge PWM Motor Driver
ELECTRICAL CHARACTERISTICS (continued) at TA = +25°C, VBB = 50 V, VDD = 5.0 V, VSENSE = 0.5 V,
fPWM < 50 kHz (unless noted otherwise)
Characteristics
Symbol
Test Conditions
Min. Typ. Max. Units
Reference Divider Ratio
–
–
10
–
–
Gm Error
(Note 3)
EGm
VREF = VDD
VREF = 0.5 V
0.5 Ein to 0.9 Eout:
PWM change to source on
–
–
±4.0
%
–
–
±14
%
600
750
1200
ns
Propagation Delay Times
tpd
PWM change to source off
PWM change to sink on
50
150
350
ns
600
750
1200
ns
PWM change to sink off
50
100
150
ns
Thermal Shutdown Temp.
Thermal Shutdown Hysteresis
UVLO Enable Threshold
UVLO Hysteresis
TJ
∆TJ
UVLO
∆UVLO
Increasing VDD
–
165
–
°C
–
15
–
°C
3.90 4.2
4.45
V
0.05 0.10
–
V
NOTES:
1. Typical Data is for design information only.
2. Negative current is defined as coming out of (sourcing) the specified device terminal.
3. Gm error = ([VREF/10] – VSENSE)/(VREF/10) where VSENSE = ITRIP•RS.
Allegro MicroSystems, Inc.
5
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com