ADG726 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
제조사
ADG726 Datasheet PDF : 12 Pages
| |||
ADG726/ADG732
VDD
VSS
IDD
ISS
GND
S
D
IN
VD (VS)
RON
∆RON
RFLAT(ON)
IS (OFF)
ID (OFF)
ID, IS (ON)
VINL
VINH
IINL(IINH)
CS (OFF)
CD (OFF)
CD, CS(ON)
CIN
tTRANSITION
tON(EN)
tOFF(EN)
tOPEN
Charge
Injection
OFF Isolation
Crosstalk
ON Response
Insertion
Loss
TERMINOLOGY
Most Positive Power Supply Potential
Most Negative Power Supply in a Dual-Supply Application. In single-supply applications, connect to GND.
Positive Supply Current
Negative Supply Current
Ground (0 V) Reference
Source Terminal. May be an input or output.
Drain Terminal. May be an input or output.
Logic Control Input
Analog Voltage on Terminals D and S
Ohmic Resistance between D and S
On Resistance Match between any two channels, i.e., RONmax – RONmin
Flatness is defined as the difference between the maximum and minimum value of on resistance as measured
over the specified analog signal range.
Source Leakage Current with the Switch OFF
Drain Leakage Current with the Switch OFF
Channel Leakage Current with the Switch ON
Maximum Input Voltage for Logic “0”
Minimum Input Voltage for Logic “1”
Input Current of the Digital Input
OFF Switch Source Capacitance. Measured with reference to ground.
OFF Switch Drain Capacitance. Measured with reference to ground.
ON Switch Capacitance. Measured with reference to ground.
Digital Input Capacitance
Delay Time Measured between the 50% and 90% Points of the Digital Inputs and the Switch ON Condition
when Switching from One Address State to Another
Delay Time between the 50% and 90% Points of the EN Digital Input and the Switch ON Condition
Delay Time between the 50% and 90% Points of the EN Digital Input and the Switch OFF Condition
OFF Time Measured between the 80% Points of Both Switches when Switching from One Address State to Another
A Measure of the Glitch Impulse Transferred from the Digital Input to the Analog Output During Switching
A Measure of Unwanted Signal Coupling through an OFF Switch
A Measure of Unwanted Signal Coupling from One Channel to Another as a Result of Parasitic Capacitance
The Frequency Response of the ON Switch
The Loss Due to the On Resistance of the Switch
–8–
REV. 0
Share Link: 