CY7C4261-25JC(2003) 데이터 시트보기 (PDF) - Cypress Semiconductor
부품명
상세내역
제조사
CY7C4261-25JC Datasheet PDF : 18 Pages
| |||
CY7C4261
CY7C4271
Maximum Ratings[4]
(Above which the useful life may be impaired. For user guide-
lines, not tested.)
Storage Temperature ....................................... −65°C to +150°C
Ambient Temperature with
Power Applied.................................................... −55°C to +125°C
Supply Voltage to Ground Potential .................−0.5V to +7.0V
DC Voltage Applied to Outputs
in High-Z State ............................................−0.5V to VCC + 0.5V
DC Input Voltage..........................................−0.5V to Vcc+0.5V
Output Current into Outputs (LOW)............................. 20 mA
Static Discharge Voltage............................................ >2001V
(per MIL-STD-883, Method 3015)
Latch-up Current...................................................... >200 mA
Operating Range
Range
Commercial
Industrial[5]
Military
Ambient Temperature
0°C to +70°C
−40°C to +85°C
−55°C to +125°C
VCC
5V ± 10%
5V ± 10%
5V ± 10%
Electrical Characteristics Over the Operating Range[6]
7C4261/71− 10 7C4261/71− 15 7C4261/71− 25 7C4261/71− 35
Parameter
Description
Test Conditions Min. Max. Min. Max. Min. Max. Min. Max. Unit
VOH
Output HIGH Voltage VCC = Min.,
2.4
2.4
2.4
2.4
V
IOH = −2.0 mA
VOL
Output LOW Voltage VCC = Min.,
IOL = 8.0 mA
0.4
0.4
0.4
0.4 V
VIH
Input HIGH Voltage
(comm./ind.)
2.0 VCC 2.0 VCC 2.0 VCC 2.0 VCC V
VIH
Input HIGH Voltage
(military)
2.2 VCC 2.2 VCC 2.2 VCC 2.2 VCC V
VIL
IIX
IOZL
IOZH
ICC1[7]
ISB[8]
Input LOW Voltage
Input Leakage Current VCC = Max.
Output OFF,
High Z Current
OE > VIH,
VSS < VO< VCC
Active Power Supply
Current
Com’l
Ind/Mil
Average Standby
Current
Com’l
Ind/Mil
−0.5 0.8 −0.5 0.8 −0.5 0.8 −0.5 0.8 V
−10 +10 −10 +10 −10 +10 −10 +10 µA
−10 +10 −10 +10 −10 +10 −10 +10 µA
35
35
35
35 mA
40
40
40
40 mA
10
10
10
10 mA
15
15
15
15 mA
Capacitance[9]
Parameter
Description
CIN
Input Capacitance
COUT
Output Capacitance
AC Test Loads and Waveforms[10, 11]
Test Conditions
TA = 25°C, f = 1 MHz,
VCC = 5.0V
Max.
Unit
5
pF
7
pF
5V
OUTPUT
R11.1KW
INCLUDING CL
JIG AND
SCOPE
R2
680Ω
3.0V
GND
≤3 ns
ALL INPUT PULSES
90%
10%
90%
10%
≤ 3 ns
Equivalent to: THÉVENIN EQUIVALENT
420Ω
Notes:
OUTPUT
1.91V
4. The voltage on any input or I/O pin cannot exceed the power pin during power-up.
5. TA is the “instant on” case temperature.
6. See the last page of this specification for Group A subgroup testing information.
7. Input signals switch from 0V to 3V with a rise/fall time of less than 3 ns, clocks and clock enables switch at maximum frequency 20 Mhz, while data inputs switch
at 10 MHz. Outputs are unloaded. ICC1(typical) = (20 mA + (freq – 20 MHz) * (0.7 mA/MHz)).
8. All inputs = VCC – 0.2V, except WCLK and RCLK (which are switching at frequency = 20 MHz). All outputs are unloaded.
9. Tested initially and after any design or process changes that may affect these parameters.
10. CL = 30 pF for all AC parameters except for tOHZ.
11. CL = 5 pF for tOHZ.
Document #: 38-06015 Rev. *B
Page 6 of 18
Share Link: 