HDSP-71 데이터 시트보기 (PDF) - HP => Agilent Technologies
부품명
상세내역
제조사
HDSP-71
HP => Agilent Technologies
HDSP-71 Datasheet PDF : 6 Pages
| |||
3
Absolute Maximum Ratings at TA = 25°C
HER
HDSP-701E/
Parameter
711E/703E/
713E
Average Power per Dot[1]
65
Peak Forward Current per Dot[1,2]
40
(1/10 Duty Cycle, 0.1 ms Pulse Width)
Average Forward Current per Dot[1]
25
AlGaAs
HDSP-701A/
703A/711A/
713A
75
125
23[3]
Green
HDSP-701G/
711G/703G/
713G
65
40
Units
mW
mA
25
mA
Reverse Voltage per Dot
3
3
3
V
Operating Temperature
Storage Temperature
Lead Solder Temperature for 3 seconds[3]
(1.6 mm [0.063 in.] below seating plane)
–35 to +85
–35 to +85
260
–35 to +85
–35 to +85
260
–35 to +85
°C
–35 to + 85
°C
260
°C
Notes:
1. Do not exceed maximum average current per dot.
2. Derate above 25°C at 0.2 mA/°C.
3. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not
to exceed 5 seconds.
Optical/Electrical Characteristics at TA = 25°C
High Efficiency Red
Devices
HDSP-
701E
711E
703E
713E
Parameter
Luminous Intensity/Dot
(Digit Average)[1]
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage
Reverse Voltage[3]
Temperature Coefficient of VF
Symbol
IV
PEAK
d
VF
VR
⌬VF/°C
Min.
1.3
3.0
Typ.
3.6
635
626
2.6
25
-2
Max. Units
mcd
nm
nm
3.5 V
V
mV/°C
Test
Conditions
IF = 50 mA,
20% Duty Factor
IF = 50 mA
IR = 100 µA
Green
Devices
HDSP-
Parameter
Symbol Min. Typ. Max. Units
Test
Conditions
701G
711G
703G
713G
Luminous Intensity/Dot
(Digit Average)[1]
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage
Reverse Voltage[3]
Temperature Coefficient of VF
IV
0.96 4.0
PEAK
566
d
571
VF
2.6
VR
3.0 25
⌬VF/°C
-2
mcd IF = 50 mA,
20% Duty Factor
nm
nm
3.5 V IF = 50 mA
V IR = 100 µA
mV/°C
Notes:
1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
2. The dominant wavelength d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Typical specification for reference only. Do not exceed absolute maximum ratings.
Share Link: 