Features
• Minimal External Circuitry Requirements, no RF Components on the PC Board Except
Matching to the Receiver Antenna
• High Sensitivity, Especially at Low Data Rates
• SSO20 and SO20 package
• Fully Integrated VCO
• Supply Voltage 4.5 V to 5.5 V, Operating Temperature Range -40°C to 105°C
• Single-ended RF Input for Easy Adaptation to l/4 Antenna or Printed Antenna on PCB
• Low-cost Solution Due to High Integration Level
• Various Types of Protocols Supported (i.e., PWM, Manchester and Biphase)
• Distinguishes the Signal Strength of Several Transmitters via RSSI (Received Signal
Strength Indicator)
• ESD Protection According to MIL-STD. 883 (4KV HBM)
• High Image Frequency Suppression Due to 1 MHz IF in Conjunction with a SAW Front-
end Filter, up to 40 dB is thereby Achievable with Newer SAWs
• Power Management (Polling) is Possible by Means of a Separate Pin via the
Microcontroller
• Receiving Bandwidth BIF = 600 kHz
UHF ASK
Receiver
T5744
Description
The T5744 is a PLL receiver device for the receiving range of f0 = 300 MHz to
450 MHz. It is developed for the demands of RF low-cost data communication sys-
tems with low data rates and fits for most types of modulation schemes including
Manchester, Biphase and most PWM protocols. Its main applications are in the areas
of telemetering, security technology and keyless-entry systems.
Figure 1. System Block Diagram
1 Li cell
Encoder
Keys M44Cx9x
UHF ASK/FSK
Remote control transmitter
U2741B
T5744
XTO
PLL
VCO
Antenna Antenna
UHF ASK
Remote control receiver
Demod.
Data
interface
IF Amp
PLL
XTO
1...3
µC
Power
amp.
LNA
VCO
Rev. 4521B–RKE–01/03
1