TORX177(F,T)
3. Electrical and Optical Characteristics (Ta = 25°C, VCC = 5 V)
Characteristics
Symbol
Test Condition
Min Typ. Max Unit
Data Rate
Transmission Distance
Pulse Width Distortion (Note 4)
Maximum Receivable
Power
(Note 5)
Minimum Receivable
Power
(Note 5)
Current Consumption
High Level Output Voltage
Low Level Output Voltage
NRZ code
(Note 2)
0.1
---
Using APF (Note 3), Using TOTX177(F,T)
0.2
---
⊿t w
Pulse Width = 67 ns
Pulse Cycle = 134 ns
CL = 10 pF
Using TOTX177(F,T)
−15 ---
PMAX 15 Mb / s, Using APF
−14.5 ---
PMIN
ICC
VOH
VOL
15 Mb / s, Using APF
---
---
---
10
3.6 4.5
---
0.2
15 Mb / s
5
m
15
ns
--- dBm
−24 dBm
15
mA
---
V
0.4
V
Note 2: 7.5Mb/s (max.) Biphase marked signal.
When modulated optical high level signal is received, output signal is high.
When modulated optical low level signal is received, output signal is low.
When non−modulated signal (optical all high or all low level signal) is inputted, output signal is not stable.
Note 3: All Plastic Fiber (980 / 1000 μm).
Note 4: Between input of TOTX177(F,T) and output of TORX177(F,T).
Note 5: BER ≤ 10−9, peak value.
4. Mechanical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Insertion Force
Withdrawal Force
Torque for Self−Tap
(Note 6)
(Note 6)
Initial value
Initial value
Using self−tapping screw
(M3 × 8)
Note 6: Square type connector : EIAJ RC-5720B
5. Application Circuit
Min Typ. Max Unit
---
--- 39.2 N
5.9
--- 39.2
N
58.8 ---
98 N·cm
6. Required Optical Fiber with Fiber Optic Connectors
All Plastic Fiber with Square Type Connector ( EIAJ RC-5720B )
2
2006-12-28