ZXCT1081 데이터 시트보기 (PDF) - Zetex => Diodes

부품명

상세내역

제조사

ZXCT1081

High voltage high-side current monitor

Zetex => Diodes 

ZXCT1081

Application information

The ZXCT1081 has been designed to allow it to operate with 5V supply rails while sensing

common mode signals up to 40V. This makes it well suited to a wide range of industrial and power

supply monitoring applications that require the interface to 5V systems while sensing much

higher voltages.

To allow this its VCC pin can be used independently of SENSE+.

Figure 1 shows the basic configuration of the ZXCT1081.

Input

SENSE+

ZXCT1081

R SENSE

R SH

VCC

OUT

GND

M1

A1

A2 +1

RG

SENSE- Load

Figure 1 Typical configuration of ZXCT1081

Load current from the input is drawn through RSENSE developing a voltage VSENSE across the

inputs of the ZXCT1081.

The internal amplifier forces VSENSE across internal resistance RSH causing a current to flow

through MOSFET M1. This current is then converted to a voltage by RG. A ratio of 10:1 between

RG and RSH creates the fixed gain of 10. The output is then buffered by the unity gain buffer.

The gain equation of the ZXCT1081 is:

VOUT

=

IL

RSENSE

--R----G----

RSH

×

1=

IL × RSENSE × 10

The maximum recommended differential input voltage, VSENSE, is 150mV; it will however

withstand voltages up to 800m⍀. This can be increased further by the inclusion of a resistor, RLIM,

between SENSE- pin and the load; typical value is of the order of 10k .

Issue 4 - April 2007

8

© Zetex Semiconductors plc 2007

www.zetex.com

Share Link: