AMMC-6233 데이터 시트보기 (PDF) - Avago Technologies

부품명

상세내역

제조사

AMMC-6233

18 to 32 GHz GaAs Low Noise Amplifier

Avago Technologies 

AMMC-6233

18 to 32 GHz GaAs Low Noise Amplifier

Data Sheet

Chip Size: 1900 x 800 µm (74.8 x 31.5 mils)

Chip Size Tolerance: ± 10 µm (± 0.4 mils)

Chip Thickness: 100 ± 10 µm (4 ± 0.4 mils)

RF Pad Dimensions: 110 x 90 µm (4.33 x 3.54 mils)

DC Pad Dimensions: 100 x 100 µm (3.94 x 3.94 mils)

Description

Avago Technologies’ AMMC-6233 is a high gain, low-

noise amplifier that operates from 18 GHz to 32 GHz.

This LNA provides a wide-band solution for system

design since it covers several bands, thus, reduces

part inventory. The device has input / output match to

50 Ohm, is unconditionally stable and can be used as

either primary or sub-sequential low noise gain stage.

By eliminating the complex tuning and assembly

processes typically required by hybrid (discrete- FET)

amplifiers, the AMMC-6233 is a cost-effective alternative

in the 18 - 32 GHz communications receivers. The

backside of the chip is both RF and DC ground. This

helps simplify the assembly process and reduces

assembly related performance variations and costs. It

is fabricated in a PHEMT process to provide exceptional

noise and gain performance. For improved reliability

and moisture protection, the die is passivated at the

active areas.

Applications

•  Microwave radio systems

•  Satellite VSAT, DBS up/down link

•  LMDS & Pt-Pt mmW long haul

•  Broadband wireless access (including 802.16 and

802.20 WiMax)

•  WLL and MMDS loops

Features

•  Integrated DC block and choke

•  50 Ω input and output match

•  Single positive supply

•  No negative gate bias

Specifications (Vd = 3.0 V, Idd = 65 mA)

•  RF frequencies: 18 - 32 GHz

•  Small-signal gain: 22 dB

•  Low gain flatness: ±1 dB

•  Typical noise figure: 3.0 dB

•  Typical output IP3: 19 dBm

Attention: Observe precautions for

handling electrostatic sensitive devices.

ESD Machine Model (Class A)

ESD Human Body Model (Class 1A)

Refer to Avago Technologies Application Note A004R:

Electrostatic Discharge, Damage and Control.

Note:

1. This MMIC uses depletion mode pHEMT devices.

Share Link: