WPMDM1500602 / 171050601
MagI3C Power Module
VDRM – Variable Step Down Regulator Module
NOTES
(1) Min and Max limits are 100% production tested at 25°C. Limits over the operating temperature range are guaranteed
through correlation using Statistical Quality Control (SQC) methods.
(2) The human body model is a 100pF capacitor discharged through a 1.5 kΩ resistor into each pin. Test method is per
JESD-22-114.
(3) JEDEC J-STD020
(4) Typical numbers are valid at 25°C ambient temperature and represent statistically the utmost probability assuming the
Gaussian distribution.
(5) Depending on heat sink design, number of PCB layers, copper thickness and air flow.
(6) Measured on a 8cm x 8cm four layer PCB, 104µm copper on outer layers and 70µm copper on inner layers, sixty 10mil
(254µm) thermal vias, no air flow, and 1W power dissipation
(7) Module ON (Enable floating or high), feedback voltage applied by external source no PWM switching
(8) Using Bellcore TR332 Model, 50% stress, TA = 40°C, no device burn-in.
we-online.com
Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 2.0
© July 2018
7/56