LH1550 데이터 시트보기 (PDF) - Infineon Technologies
부품명
상세내역
제조사
LH1550 Datasheet PDF : 3 Pages
| |||
Recommended Operating Conditions
100
80
60
IFon = 2.0 mA
40
IFon = 3.0 mA
IFon =
4.5 to 20 mA
20
0
–40 –20
0
20
40
60 80
Ambient Temperature (°C)
Absolute Maximum Ratings TA=25°C
Ambient Temperature Range (TA) .................................... –40 to +85°C
Storage Temperature Range (Tstg) ................................. –40 to +150°C
Pin Soldering Temperature (t=10 s max) (TS) ............................. 260°C
Input/Output Isolation Voltage
(VRMS t=1.0 s, IISO=10 µA max) (VISO) .............................. 3750 VRMS
LED Continuous Forward Current (IF) .........................................50 mA
LED Reverse Voltage (IR≤10 µA) (VR)........................................... 8.0 V
DC or Peak AC Load Voltage (IL≤50 µA) (VL) .............................. 350 V
Continuous DC Load Current (IL)
Bidirectional Operation............................................................100 mA
Unidirectional Operation............................................................ — mA
Peak Load Current (t=100 ms) (single shot) (IP) ................................ †
Output Power Dissipation (continuous) (PDISS)........................ 550 mW
† Refer to Current Limit Performance Application Note 58 for a discussion on
relay operation during transient currents.
Note:
Stresses in excess of the absolute Maximum Ratings can cause permanent
damage to the device. These are absolute stress ratings only. Functional oper-
ation of the device is not implied at these or any other conditions in excess of
those given in the operational sections of this document. Exposure to absolute
Maximum Ratings for extended periods of time can adversely affect reliability.
Electrical Characteristics TA=25°C
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the
result of engineering evaluations. Typical values are for information only and are not part of the testing requirements.
Parameter
Input
LED Forward Current, Switch Turn-on
LED Forward Current, Switch Turn-off
LED Forward Voltage
Output
ON-resistance
ac/dc: Pin 4 (±) to 6 (±)
dc: Pin 4, 6 (+) to 5 (±)
OFF-resistance
Current Limit
ac/dc: Pin 4 (±) to 6 (±)
dc: Pin 4, 6 (+) to 5 (±)
Off-state Leakage Current
Output Capacitance
Pin 4 to 6
Switch Offset
Transfer
Input/Output Capacitance
Turn-on Time
Turn-off Time
Sym. Min.
Typ.
Max.
Units Test Conditions
IFon
—
1.2
2.5
mA
IFoff
0.01
1.1
—
mA
VF
1.10*
1.19*
1.45*
V
RON
25†
3.0
ROFF
0.5
ILMT
150
—
—
—
—
—
—
—
—
—
37†
50†
Ω
5.0
6.25
5000
—
GΩ
200
270
mA
—
—
0.2
200
nA
—
1.0
µA
40
—
pF
8.0
—
0.15
—
V
CISO
—
ton
—
toff
—
0.8
—
pF
1.4
3.0
ms
0.5
3.0
ms
IL=100 mA, t=10 ms
VL±300 V
IF=10 mA
IF=5.0 mA, IL=50 mA
IF=5.0 mA, IL=100 mA
IF=0 mA, VL=±100 V
IF=5.0 mA, t=5.0 ms
VL=±13.0 V
IF=5.0 mA, t=5.0 ms
VL=±4.0 V
IF=0 mA, VL=±100 V
IF=0 mA, VL=±350 V
IF=0 mA, VL=1.0 V
IF=0 mA, VL=50 V
IF=5.0 mA
VISO=1.0 V
IF=5.0 mA, IL=50 mA
IF=5.0 mA, IL=50 mA
* IF=5.0 mA
† IL=100 mA, t=10 ms
Infineon Technologies, Corp. • Optoelectronics Division • Cupertino, CA (formerly Siemens Microelectronics, Inc.)
www.infineon.com/opto • 1-800-777-4363
2
LH1550
March 3, 2000-10
Share Link: 