OPF342A(1996) 데이터 시트보기 (PDF) - Optek Technology

부품명

상세내역

제조사

OPF342A
(Rev.:1996)

Fi ber Optic GaA lAs High Speed LED

Optek Technology 

Product Bulletin OPF342

August 1996

Fiber Optic GaAlAs High Speed LED in ST* Receptacle

Types OPF342A, OPF342B, OPF342C, OPF342D

Features

• Component pre-mounted and ready

to use

• Pre-tested with fiber to assure

performance

• Popular ST* style receptacle

• High Speed

• Electrically isolated from case

Description

The OPF342 series LED consists of a

hermetic LED, pre-mounted and aligned

in an ST* receptacle. This configuration

is designed for PC board or panel

mounting. Includes lock washer and

jam nut, two 2-56 screws, and a

dust cap.

Absolute Maximum Ratings (TA = 25o C unless otherwise noted)

Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0 V

Continuous Forward Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA(4)

Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55o C to +150o C

Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +125o C

Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering

iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C(1)

Notes:

(1) RMA flux is recommended. Duration can be extended to 10 sec. max when flow soldering.

(2) Graded index fiber, 50 µm core, N.A. = 0.20.

(3) To convert radiant power output to dBm, use the following expression dBm = 10 log

(µW/1000).

(4) Derate linearly @ 1.0 mA/o C above 25o C.

(5) Prebias @ 5 mA current.

LED Burn-in

All LED's are subject to 100% burn-in testing. Test conditions are 96 hours at 100 mA

continuous current in 25o C ambient.

The LED’s are designed to interface with

multimode optical fibers from 50/125 to

200/300 microns.

*ST is a registered trademark of AT&T.

TYPICAL COUPLED POWER into OPTICAL FIBER

Fiber

Refractive

Index

50/125 µm Graded

62.5/125 µm Graded

100/140 µm Graded

200/300 µm* Step

*PCS - Plastic Clad Silica

Typical Coupled Power

IF = 100 mA @ 25o C

N.A. OPF342D OPF342C OPF342B OPF342A

0.20

7.5 µW 12.5 µW 18 µW

25 µW

0.28

14 µW

22 µW

34 µW

45 µW

0.29

38 µW

62 µW

95 µW 125 µW

0.41

140 µW 235 µW 340 µW 475 µW

Optek Technology, Inc.

1215 W. Crosby Road

Carrollton, Texas 75006

8-42

(972) 323-2200

Fax (972) 323-2396

Share Link: