Optical disc ICs
FApplication example
BH3563FV
FOperation notes
(1) When the MUTE pin voltage reaches 1.5V or high-
er, the output voltage is muted and the bias level is out-
put.
(2) Frequency characteristics can be changed by ad-
justing the capacitor attached to pin 3 (pin18) or pin 5
(pin16).
(3) Gain can be changed by attaching a resistor to pin
4 (pin17).
(4) To prevent popping sounds due to sudden fluctua-
tion in the mute pin voltage, attach a capacitor (approxi-
mately 1µF) to pin 7.
(5) Be sure to connect the IC to a 0.1µF bypass capaci-
tor to the power supply, at the base of the IC.
138