WMF600A View Datasheet(PDF) - YCL Electronics

Part Name

Description

Manufacturer

WMF600A

Dual Line in Line Microfilter

YCL Electronics  

Product Specification

WMF600A

4.5.2. Attenuation distortion in the voice band:

4.5.2.1. Description:

The variation of insertion loss with frequency shall be measured using the

configuration in Figure 2. The defined ZHP-r will be attached to the Line port of the

filter. The increase in attenuation distortion, relative to the 1004 Hz insertion loss,

caused by the POTS filter with the ZHP-r ( or modem ) load.

4.5.2.2. Test configuration:

Figure 2. defines the test configuration and the value of the test components that

shall be used for transmission measurement in the voice band for the remote

POTS filter.

Signal

source

Microfilter

POTS

Line

port

port

ZL

(load)

Level

Meter

ZHP-r

(load)

Figure 2.

Note :

1. ZHP-r = the impedance presented to the POTS connection by an ATU-R.

2. ZL = real impedance 600 Ω.

3. Test apparatus: Function generator HP 33120A or equivalent, Readout

oscilloscope HP 54621A or equivalent.

Data sheet subject to change without notice

RDPS-MF064(R2)03/18/2003

SHEET 10 OF 15

Share Link: