WMF600A View Datasheet(PDF) - YCL Electronics

Part Name

Description

Manufacturer

WMF600A

Dual Line in Line Microfilter

YCL Electronics  

Product Specification

WMF600A

4.4. DC characteristics:

All requirements of this specification can be met in the presence of all POTS loop currents

from 0 mA to 100 mA. This In-Line Filter can pass POTS tip-to-ring DC voltages of 0 V to

105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from15.3 Hz to 68 Hz

superimposed on DC voltages in the range from 0 V to 105 V. The DC resistance from tip-

to-ring at the Line port interface with the POTS interface shorted, shall be less than or equal

to 25 ohms for one filter.

The DC resistance from tip-to-ground and from ring-to-ground at the POTS interface with

the Line interface open shall be greater than or equal to 5 Megohms. The ground point shall

be local building or green wire ground. As an objective, the DC resistance should exceed

10MΩ.

Data sheet subject to change without notice

RDPS-MF064(R2)03/18/2003

SHEET 8 OF 15

Share Link: