TC649VUATR View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

TC649VUATR

PWM Fan Speed Controller with Auto-Shutdown and FanSense™ Technology

Microchip Technology 

TC649

2.0 PIN DESCRIPTIONS

The descriptions of the pins are listed in Table 2-1.

TABLE 2-1: PIN FUNCTION TABLE

Pin No. Symbol

Descriptiion

1

VIN Analog Input

2

CF Analog Output

3

VAS Analog Input

4

GND Ground Terminal

5

SENSE Analog Input

6

FAULT Digital (Open Collector) Output

7

VOUT Digital Output

8

VDD Power Supply Input

2.1 Analog Input (VIN)

The thermistor network (or other temperature sensor)

connects to the VIN input. A voltage range of 1.25V to

2.65V (typical) on this pin drives an active duty cycle of

0% to 100% on the VOUT pin. The TC649 enters shut-

down mode when VIN ≤ VSHDN. During shutdown, the

FAULT output is inactive, and supply current falls to

25 µA (typical). The TC649 exits shutdown mode when

VIN ≥ VREL. See Section 5.0, “Typical Applications”, for

details.

2.2 Analog Output (CF)

CF is the positive terminal for the PWM ramp generator

timing capacitor. The recommended CF is 1 µF for

30 Hz PWM operation.

2.3 Analog Input (VAS)

An external resistor divider connected to the VAS input

sets the auto-shutdown threshold. Auto-shutdown

occurs when VIN ≤ VAS. The fan is automatically

restarted when VIN ≥ (VAS + VHAS). See Section 5.0,

“Typical Applications”, for more details.

2.4 Ground (GND)

GND denotes the ground terminal.

2.5 Analog Input (SENSE)

Pulses are detected at the SENSE pin as fan rotation

chops the current through a sense resistor (RSENSE).

The absence of pulses indicates a fault. See

Section 5.0, “Typical Applications”, for more details.

2.6 Digital Output (FAULT)

The FAULT line goes low to indicate a fault condition.

When FAULT goes low due to a fan fault condition, the

device is latched in shutdown mode until deliberately

cleared or until power is cycled.

2.7 Digital Output (VOUT)

VOUT is an active high complimentary output that drives

the base of an external NPN transistor (via an appropri-

ate base resistor) or the gate of an N-channel

MOSFET. This output has asymmetrical drive (see

Section 1.0, “Electrical Characteristics”).

2.8 Power Supply Input (VDD)

VDD may be independent of the fan’s power supply

(see Section 1.0, “Electrical Characteristics”).

DS21449C-page 4

 2002 Microchip Technology Inc.

Share Link: