TEA7063 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
TEA7063 Datasheet PDF : 15 Pages
| |||
TEA7063
2. TRANSMISSION CHAIN
2.1 A.G.C. In Transmission
The transmission gain between Microphone Input
(pin 7) and Vline (pin 16) is internally decreased
of 6dB when the line current varies from ILL to
ILS with a constant AC load of 600Ω.
The values of ILL (long line current) and ILS (short
line current) are programmable through I-start (pin
9) and I-slope (pin 15) (see also paragr. 4).
2.2 Sending Impedance
The impedance of the Output Stage Amplifier, Zout,
is determined by the impedance Z4 (at pin 3).
Zout = 10.65 xZ4
The total AC impedance shown to the line is the
parallel
Zpar = Zout//Zint//Zext
where:
- Zint = 10KΩ//8.5 nF (internal)
- Zext = R6//C4 (at pin 16)
2.3 Sending Mute
In normal speech operation (Vmute at pin 14 <
0.8V), the signal at Microphone Input (pin 7) is
amplified to Vline (pin 16) with the gain Gs (long
line) or 6dB lower (shorter lines) depending on
AGC control (see paragr. 4).
In sending mute condition (V 14 > 1.6V) these
gains are reduced of at least 60dB. In the same
condition, DTMF input (pin 6) is activated, with
gain Gmf to the line independent from Iline lenght.
2.4 Antisidetone Buffer
The signal coming from the sending preamplifier
is internally presented at pin 4 and than buffered
to pins 1 and 2 for sidetone cancellation (see
paragraph 3.2).
Figure 3
6/15
Share Link: 