ATTINY11 View Datasheet(PDF) - Unspecified

Part Name

Description

Manufacturer

ATTINY11

AVR Studio® Compatible

Unspecified 

Hardware Description

3.7.2.1

Parallel High-voltage

Programming

To use High-voltage Programming, the programming signal must be routed to the AVR

I/O pins. The two 10-wire cables supplied with the STK500 can be used to connect the

PROG DATA header to the PORTB header and the PROG CTRL header to the PORTD

header, as shown in Figure 3-17.

Figure 3-17. Connection for Parallel High-voltage Programming

Some of the jumper settings on STK500 must be changed when using High-voltage Pro-

gramming. Figure 3-18 explains these jumper settings.

3-12

1925C–AVR–3/03

AVR STK500 User Guide

Share Link: