OMNIVISION TECHNOLOGIES, Inc.
OV5017
Table 3. Bit descriptions (Continued)
Register
Name
Bit name
Range
The array is divided into 16x16 blocks as
shown in Figure 1.1. each block is H24xV18 pixels.
The method for selecting vertical and horizontal
window region is the same. Each direction uses an
eight-bit register. Bit [7:4] selects the start block
location. Bit [3:0] selects the end block location. For
example, to select the shaded area as the active
region, use HWCTL=4cH,VWCTL=44H.
This window selection feature changes only the
assertion time of HREF and does not change the
pixel rate or the data rate. If the end location is
equal to or less than the start location, the window
size is from start location to the end of the right
most edge.
Confidential Preliminary Product Specification
Function
HREF
HWS HWE
0 1 2 3 7 11 15
VWS
VWE
– 24 X18 PIXELS
Figure 4. Windowing
October 20, 1997
Version 1.6
9