DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

IS42RM16800E-6BLI View Datasheet(PDF) - Integrated Silicon Solution

Part Name
Description
Manufacturer
IS42RM16800E-6BLI
ISSI
Integrated Silicon Solution ISSI
IS42RM16800E-6BLI Datasheet PDF : 25 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
IS42SM81600E / IS42SM16800E / IS42SM32400E
IS42RM81600E / IS42RM16800E / IS42RM32400E
Extended Mode Register Definition
BA1 BA0 A11 A10 A9
A8
A7 A6 A5 A4 A3 A2 A1 A0 Address Bus (Ax)
Ext. Mode Reg. (Ex)
PASR
E2 E1 E0 Partial Array Self Refresh
Coverage
0 0 0 Fully array (4 banks) - (Default)
0 0 1 Half array (banks 0, 1)
0 1 0 Quarter array (bank 0)
0 1 1 Reserved
1 0 0 Reserved
1 0 1 One-eighth array (1/2 bank 0)
1 1 0 One-sixteenth array (1/4 bank 0)
1 1 1 Reserved
TCSR
E4 E3 Max. Case Temp.
0 0 70oC
0 1 45oC
1 0 15oC
1 1 85oC (Default)
DS
E6 E5 Driver Strength
0 0 Full strength driver (Default)
0 1 Half strength driver
1 0 Quarter strength driver
set to "0"
1 1 Reserved
E11 E10 E9 E8 E7 E6-E0
0 0 0 0 0 Valid Normal operation
– – – – – – All other states reserved
BA1 BA0 Mode Register Definition
0 0 Program Mode Register
0 1 Reserved
1 0 Program Extended mode Register
1 1 Reserved
The extended mode register is programmed via the MODE REGISTER SET command (BA1 = 1, BA0 = 0) and
retains the stored information until it is programmed again or the device loses power. The extended mode register
must be programmed with E7 through E11 set to “0.” The extended mode register must be loaded when all banks are
idle and no bursts are in progress, and the controller must wait the specified time before initiating any subsequent
operation. Violating either of these requirements results in unspecified operation. The extended mode register must be
programmed to ensure proper operation.
Temperature-Compensated Self Refresh (TCSR)
TCSR allows the controller to program the refresh interval during self refresh mode, according to the case temperature
of the mobile device. This allows great power savings during self refresh during most operating temperature ranges.
Only during extreme temperatures would the controller have to select a higher TCSR level that will guarantee data
during self refresh.
12
Integrated Silicon Solution, Inc. - www.issi.com
Rev.  B
04/15/2011

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]