MAX4717 View Datasheet(PDF) - Maxim Integrated

Part Name

Description

Manufacturer

MAX4717

4.5Ω/20Ω, 300MHz Bandwidth, Dual SPDT Analog Switches in UCSP

Maxim Integrated 

4.5Ω/20Ω, 300MHz Bandwidth, Dual SPDT

Analog Switches in UCSP

Pin Description

PIN

UCSP

µMAX/

TDFN

NAME

FUNCTION

A1

7

NC2

Analog Switch 2—Normally Closed

Terminal

A2

8

IN2

Analog Switch 2—Digital Control

Input

A3

9

COM2 Analog Switch 2—Common

Terminal

Analog Switch 2—Normally Open

A4

10

NO2 Terminal

B1

6

GND Ground. Connection.

B4

1

V+ Positive-Supply Voltage

C1

5

NC1

Analog Switch 1—Normally Closed

Terminal

C2

4

IN1

Analog Switch 1—Digital Control

Input

C3

3

COM1

Analog Switch 1—Common

Terminal

C4

2

NO1

Analog Switch 1—Normally Open

Terminal

—

—

EP

Exposed Pad (for TDFN package

only). Connect to ground.

Detailed Description

The MAX4717/MAX4718 high-speed, low-voltage, low on-

resistance (RON), dual SPDT analog switches operate

from a single +1.8V to +5.5V supply. The switches feature

break-before-make switching operation and fast switch-

ing speeds (tON = 80ns (max), tOFF = 40ns (max)).

These switches have low 15pF on-channel capaci-

tance, which allows for 12Mbps switching of the data

signals for USB 1.0/1.1 applications. The MAX4717 is

designed to switch D+ and D- USB signals with a guar-

anteed skew of less than 2ns (see Figure 4) as mea-

sured from 50% of the input signal to 50% of the output

signal.

Applications Information

Digital Control Inputs

The MAX4717/MAX4718 logic inputs accept up to

+5.5V regardless of supply voltage. For example, with

a +3.3V supply, IN_ can be driven low to GND and high

to +5.5V allowing for mixing of logic levels in a system.

Driving the control logic inputs rail-to-rail minimizes

power consumption. For a +3V supply voltage, the

logic thresholds are 0.5V (low) and 1.4V (high); for a

+5V supply voltage, the logic thresholds are 0.8V (low)

and 2.0V (high).

Analog Signal Levels

The on-resistance of the MAX4717/MAX4718 changes

very little for analog input signals across the entire supply

voltage range (see the Typical Operating Characteristics).

The switches are bidirectional, so the NO_, NC_, and

COM_ pins can be either inputs or outputs.

Power-Supply Sequencing and

Overvoltage Protection

Caution: Do not exceed the absolute maximum rat-

ings because stresses beyond the listed ratings

may cause permanent damage to the device.

Proper power-supply sequencing is recommended for

all CMOS devices. Always apply V+ before applying

analog signals, especially if the analog signal is not

current-limited.

UCSP Application Information

For the latest application details on UCSP construction,

dimensions, tape carrier information, printed circuit

board techniques, bump-pad layout, and recommend-

ed reflow temperature profile as well as the latest infor-

mation on reliability testing results, go to the Maxim

web site at www.maxim-ic.com/ucsp to find the

Application Note: USCP—A Wafer-Level Chip-Scale

Package.

Chip Information

TRANSISTOR COUNT: 235

PROCESS: BiCMOS

10 ______________________________________________________________________________________

Share Link: