SST25LF080A View Datasheet(PDF) - Silicon Storage Technology
Part Name
Description
Manufacturer
SST25LF080A Datasheet PDF : 25 Pages
| |||
EOL Product Data Sheet
PRODUCT IDENTIFICATION
TABLE 2: PRODUCT IDENTIFICATION
Manufacturer’s ID
Device ID
SST25LF080A
Address
00000H
00001H
Data
BFH
80H
T2.0 1248
MEMORY ORGANIZATION
The SST25LF080A SuperFlash memory array is orga-
nized in 4 KByte sectors with 32 KByte overlay blocks.
8 Mbit SPI Serial Flash
SST25LF080A
DEVICE OPERATION
The SST25LF080A is accessed through the SPI (Serial
Peripheral Interface) bus compatible protocol. The SPI bus
consist of four control lines; Chip Enable (CE#) is used to
select the device, and data is accessed through the Serial
Data Input (SI), Serial Data Output (SO), and Serial Clock
(SCK).
The SST25LF080A supports both Mode 0 (0,0) and Mode
3 (1,1) of SPI bus operations. The difference between the
two modes, as shown in Figure 2, is the state of the SCK
signal when the bus master is in Stand-by mode and no
data is being transferred. The SCK signal is low for Mode 0
and SCK signal is high for Mode 3. For both modes, the
Serial Data In (SI) is sampled at the rising edge of the SCK
clock signal and the Serial Data Output (SO) is driven after
the falling edge of the SCK clock signal.
CE#
MODE 3
SCK MODE 0
MODE 3
MODE 0
SI
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
DON'T CARE
MSB
HIGH IMPEDANCE
SO
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
MSB
1248 F02.0
FIGURE 2: SPI PROTOCOL
©2006 Silicon Storage Technology, Inc.
4
S71248-06-EOL
1/06
Share Link: 