LPC1767 View Datasheet(PDF) - NXP Semiconductors.

Part Name

Description

Manufacturer

LPC1767

32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 64 kB SRAM with Ethernet, USB 2.0 Host/Device/OTG, CAN

NXP Semiconductors. 

NXP Semiconductors

LPC1769/68/67/66/65/64/63

32-bit ARM Cortex-M3 microcontroller

Table 4. Pin description …continued

Symbol

Pin

Ball

P0[4]/

I2SRX_CLK/

RD2/CAP2[0]

81[1]

A8[1]

P0[5]/

I2SRX_WS/

TD2/CAP2[1]

80[1]

D7[1]

P0[6]/

I2SRX_SDA/

SSEL1/MAT2[0]

79[1]

B8[1]

P0[7]/

I2STX_CLK/

SCK1/MAT2[1]

78[1]

A9[1]

P0[8]/

I2STX_WS/

MISO1/MAT2[2]

77[1]

C8[1]

P0[9]/

I2STX_SDA/

MOSI1/MAT2[3]

76[1]

A10[1]

P0[10]/TXD2/

SDA2/MAT3[0]

48[1]

H7[1]

P0[11]/RXD2/

SCL2/MAT3[1]

49[1]

K9[1]

Type

I/O

I/O

I

I

I/O

I/O

O

I

I/O

I/O

I/O

O

I/O

I/O

I/O

O

I/O

I/O

I/O

O

I/O

I/O

I/O

O

I/O

O

I/O

O

I/O

I

I/O

O

Description

P0[4] — General purpose digital input/output pin.

I2SRX_CLK — Receive Clock. It is driven by the master and received

by the slave. Corresponds to the signal SCK in the I2S-bus

specification. (LPC1769/68/67/66/65/63 only).

RD2 — CAN2 receiver input. (LPC1769/68/66/65/64 only).

CAP2[0] — Capture input for Timer 2, channel 0.

P0[5] — General purpose digital input/output pin.

I2SRX_WS — Receive Word Select. It is driven by the master and

received by the slave. Corresponds to the signal WS in the I2S-bus

specification. (LPC1769/68/67/66/65/63 only).

TD2 — CAN2 transmitter output. (LPC1769/68/66/65/64 only).

CAP2[1] — Capture input for Timer 2, channel 1.

P0[6] — General purpose digital input/output pin.

I2SRX_SDA — Receive data. It is driven by the transmitter and read

by the receiver. Corresponds to the signal SD in the I2S-bus

specification. (LPC1769/68/67/66/65/63 only).

SSEL1 — Slave Select for SSP1.

MAT2[0] — Match output for Timer 2, channel 0.

P0[7] — General purpose digital input/output pin.

I2STX_CLK — Transmit Clock. It is driven by the master and received

by the slave. Corresponds to the signal SCK in the I2S-bus

specification. (LPC1769/68/67/66/65/63 only).

SCK1 — Serial Clock for SSP1.

MAT2[1] — Match output for Timer 2, channel 1.

P0[8] — General purpose digital input/output pin.

I2STX_WS — Transmit Word Select. It is driven by the master and

received by the slave. Corresponds to the signal WS in the I2S-bus

specification. (LPC1769/68/67/66/65/63 only).

MISO1 — Master In Slave Out for SSP1.

MAT2[2] — Match output for Timer 2, channel 2.

P0[9] — General purpose digital input/output pin.

I2STX_SDA — Transmit data. It is driven by the transmitter and read

by the receiver. Corresponds to the signal SD in the I2S-bus

specification. (LPC1769/68/67/66/65/63 only).

MOSI1 — Master Out Slave In for SSP1.

MAT2[3] — Match output for Timer 2, channel 3.

P0[10] — General purpose digital input/output pin.

TXD2 — Transmitter output for UART2.

SDA2 — I2C2 data input/output (this is not an open-drain pin).

MAT3[0] — Match output for Timer 3, channel 0.

P0[11] — General purpose digital input/output pin.

RXD2 — Receiver input for UART2.

SCL2 — I2C2 clock input/output (this is not an open-drain pin).

MAT3[1] — Match output for Timer 3, channel 1.

LPC1769_68_67_66_65_64_63

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 7 — 5 April 2011

© NXP B.V. 2011. All rights reserved.

9 of 79

Share Link: