F81216 View Datasheet(PDF) - Feature Integration Technology Inc.
Part Name
Description
Manufacturer
F81216 Datasheet PDF : 37 Pages
| |||
F81216
5.2.1.5 Interrupt Enable Register – Base + 1
Power-on default [7:0] = 0x00h.
Bit
Name
R/W
Description
7:4 Reserved
R/W Return 0 when read. Access only when LCR[7] is 0
3
EDSSI
R/W Enable Modem Status Interrupt. Access only when LCR[7] is 0.
2
ELSI
R/W Enable Line Status Error Interrupt. Access only when LCR[7] is 0.
1
ETBFI
R/W Enable Transmitter Holding Register Empty Interrupt. Access only
when LCR[7] is 0.
0
ERBFI
R/W Enable Received Data Available Interrupt. Access only when LCR[7]
is 0
5.2.1.6 Interrupt Identification Register – Base + 2
Power-on default [7:0] = 0x01h.
Bit
Name
R/W
Description
7
FIFO_EN
R
0 : FIFO is disabled
1 : FIFO is enabled.
6
FIFO_EN
R
0 : FIFO is disabled.
1 : FIFO is enabled.
5:4 Reserved
R
Return 0 when read.
3:1 IRQ_ID[2:0]
R
000 : Interrupt is caused by Modem Status
001 : Interrupt is caused by Transmitter Holding Register Empty
010 : Interrupt is caused by Received Data Available.
110 : Interrupt is caused by Character Timeout
011 : Interrupt is caused by Line Status..
0
IRQ_PENDN
R
1 : Interrupt is not pending.
0 : Interrupt is pending.
5.2.1.7 FIFO Control Register – Base + 2
Power-on default [7:0] = 0x00h.
Bit
Name
R/W
Description
7:6 RCVR_TRIG[1:0] W
00 : Receiver FIFO trigger level is 1.
01 : Receiver FIFO trigger level is 4.
10 : Receiver FIFO trigger level is 8.
-10-
August, 2007
V0.32P
Share Link: 