V7X102-J-10 View Datasheet(PDF) - Superworld Electronics

Part Name

Description

Manufacturer

V7X102-J-10

HIGH VOLTAGE CHIP CAPACITORS

Superworld Electronics 

HIGH VOLTAGE CHIP CAPACITORS

V7X SERIES

7. RELIABILITY & TEST CONDITION :

ITEM

PERFORMANCE

Electrical Characteristics Test

Visual

No abnormal exterior appearance

Insulation

Resistance

10,000Mȍ or 500/Cȍ

product whichever is smaller

Capacitance

Q

Tan į

Withstanding Voltage

Within the specified tolerance

[Class I (N) & Class II]

Class I (N) :

More than 30pF : Q > 1000

30pF & below : Q > 400+20C

(C: Capacitance, pF)

Class II (X) : 2.5% maximum

Class II (Z/E) : 4.0% maximum

No dielectric breakdown or mechanical

breakdown

Temperature Capacitance

Coefficient

Class I :

Char. Temp. Range Cap. Change (%)

N -55°C ~ +125°C

±30ppm/°C

Class II :

Char. Temp. Range Cap. Change (%)

X -55°C ~ +125°C ±15%

E -30°C ~ +85°C

Z +10°C ~ +85°C

+22% ~ -56%

+22% ~ -56%

TEST CONDITION

Visual inspection

V < 500V, Rated Voltage

V > 500V, Applied 500Vdc

Charge Time: 60sec

is applied less than 50mA current

Class I :

C < 100pF : Freq. = 1MHz±10%, Voltage = 1.0±0.2Vrms

C > 100pF : Freq. = 1KHz±10%

Class II :

X : Freq. = 1KHz±10%, Voltage = 1.0±0.2Vrms

Z/E : Freq. = 1KHz±10%, Voltage = 1.0±0.2Vrms

Perform a heat temp. at 150±5°C for 30min. then place

room temp. for 24±2hr

200V < V < 500V : 200% rated voltage

500V < V < 1000V : 150% rated voltage

1000 < V : 120% rated voltage

for 1-5sec. Current is limited to less than 50mA.

* Withstanding voltage testing requires immersion of the element in a isolation fluid prevent

arching on the chip surface, at voltage over 1000Vdc.

Class I :

[C2-C1/C1(T2-T1)] x 100%

Class II :

(C2-C1)/C1 x 100%

T1 : Standard temperature (25°C)

T2 : Test temperature

C1 : Capacitance at standard temperature (25°C)

C2 : Capacitance at test temperature (T2)

Adhesive Strength

of Termination

No indication of peeling shall occur on the

terminal electrode

A 5N f pull force shall be applied for 10±1second

5N f

Resistance to Flexure

of Substrate

Appearance :

No mechanical damage shall be occur

C-Meter : Capacitance Change

N : < ±5.0%

X : < ±12.5%

E/Z : < ±30.0%

Bending shall be applied to the 1.0mm with 1.0mm/sec

R230

C Meter

45±1mm

45±1mm

NOTE : Specifications subject to change without notice. Please check our website for latest information.

15.01.2008

SUPERWORLD ELECTRONICS (S) PTE LTD

PG. 8

Share Link: