SC-AK240 View Datasheet(PDF) - Panasonic Corporation

Part Name

Description

Manufacturer

SC-AK240

CD Stereo System

Panasonic Corporation 

Timer

Setting the clock

4 Repeat steps 2 to 3 to set the finishing time.

This is a 12-hour clock.

1 Press [CLOCK/TIMER] to select “CLOCK”.

Each time you press the button:

CLOCK ➞ ˚ PLAY ➞ ˚ REC

Original display

Finish time

2 ( Within 8 seconds or so )

Press [4, REW / ] or [¢, / FF] to set the time.

3 Press [CLOCK/TIMER] to finish setting the time.

Displaying the clock

Press [CLOCK/TIMER] once when the unit is on or in standby

mode.

The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

To activate the timer

5 Press and hold [– ˚PLAY/REC] to turn on your desired

timer.

˚ PLAY ➞ ˚ REC

no display (off)

6 Press [y] to turn off the unit.

The unit must be off for the timers to operate.

Other basic operations

Using the play or record timer

You can set the timer to come on at a certain time to wake

you up (play timer) or to record from the radio or music port

source (record timer).

Play timer and record timer cannot be used together.

Turn the unit on and set the clock.

Timer

Play timer

Action

Prepare the music source you want to listen to;

cassette (DECK 2 has the priority), disc number

(1~5), radio or music port source, and set the

volume.

Record

timer

Check the cassette’s erasure prevention tabs

(\ page 11), insert the cassette in DECK 2 and

tune to the radio station (\ page 12) or select the

music port source (\ page 15).

1 Press [CLOCK/TIMER] to select the timer function

Each time you press the button:

CLOCK ➞ ˚ PLAY ➞ ˚ REC

Original display

˚PLAY : to set the play timer

˚REC : to set the record timer

(Proceed to the next step within 8 seconds )

2 Press [4, REW / ] or [¢, / FF] to set the

starting time.

Play timer indicator

To

change the

settings

change the

source or

volume

check the

settings

cancel

Action

Repeat steps 1 to 4 and 6 (\ see left and

above).

1) Press and hold [– ˚PLAY/REC] to clear the

timer indicator from the display.

2) Make changes to the source or volume.

3) Do steps 5 to 6 (\ see above).

Press [CLOCK/TIMER] repeatedly to select

˚PLAY or ˚REC.

Press and hold [– ˚PLAY/REC] to clear the

timer indicators from the display.

If you use the unit after the timers are set

After using, check that the correct tape/disc are loaded

before turning the unit off.

Note:

• The play timer will start at the preset time with volume increasing

gradually to preset level.

• The record timer will start 30 seconds before the set time with the

volume muted.

• The timer comes on at the set time everyday if the timer is on.

• The unit must be in the standby mode for the timer to function.

• If you turn the unit off and on again while a timer is functioning, the

finish time setting will not be activated.

• If MUSIC PORT is selected as the source when the timer comes on,

the system turns on and engages MUSIC PORT as the source. If

you wish to playback or record from the portable audio equipment,

just activate the equipment’s play mode and increase the volume.

(See the portable audio equipment’s instruction manual.)

Start time

Record timer indicator

3 Press [CLOCK/TIMER] to confirm.

13

RQT8043

Share Link: