31-01UTC View Datasheet(PDF) - EVERLIGHT

Part Name

Description

Manufacturer

31-01UTC

POWER LED

EVERLIGHT 

6. Soldering Condition

Careful attention should be paid during soldering. When soldering, leave more then 3mm

from solder joint to case, and soldering beyond the base of the tie bar is recommended.

Avoiding applying any stress to the lead frame while the LEDs are at high temperature

particularly when soldering.

Recommended soldering conditions:

Hand Soldering

DIP Soldering

Temp. at tip of iron

400℃ Max. (30W Max.)

Preheat temp.

100℃ Max. (60 sec Max.)

Soldering time

3 sec Max.

Bath temp.

265 Max.

Distance

3mm Min.(From solder joint Bath time.

5 sec Max.

to case)

Distance

3mm Min.

EVERLIGHT ELECTRONICS CO., LTD.

Office: No 25, Lane 76, Sec 3, Chung Yang Rd,

Tucheng, Taipei 236, Taiwan, R.O.C

Tel: 886-2-2267-2000, 2267-9936

Fax: 886-2267-6244, 2267-6189, 2267-6306

http:\\www.everlight.com

Everlight Electronics Co., Ltd.

Device Number :DLE-301-W01

http:\\www.everlight.com

Establish date: 07-15-2004

Rev 1.0

Page: 8 of 6

Establish by: Iverson Kuo

Share Link: