56F803 View Datasheet(PDF) - Freescale Semiconductor

Part Name

Description

Manufacturer

56F803

16-bit Digital Signal Controllers

Freescale Semiconductor 

56F803 Description

• Four General Purpose Quad Timers: Timer A (sharing pins with Quad Dec0), Timers B &C without external

pins and Timer D with two pins

• CAN 2.0 B module with 2-pin ports for transmit and receive

• Serial Communication Interface (SCI) with two pins (or two additional GPIO lines)

• Serial Peripheral Interface (SPI) with configurable 4-pin port (or four additional GPIO lines)

• Computer Operating Properly (COP) Watchdog timer

• Two dedicated external interrupt pins

• Sixteen multiplexed General Purpose I/O (GPIO) pins

• External reset input pin for hardware reset

• JTAG/On-Chip Emulation (OnCE™) for unobtrusive, processor speed-independent debugging

• Software-programmable, Phase Locked Loop-based frequency synthesizer for the controller core clock

1.1.4 Energy Information

• Fabricated in high-density CMOS with 5V-tolerant, TTL-compatible digital inputs

• Uses a single 3.3V power supply

• On-chip regulators for digital and analog circuitry to lower cost and reduce noise

• Wait and Stop modes available

1.2 56F803 Description

The 56F803 is a member of the 56800 core-based family of processors. It combines, on a single chip, the

processing power of a DSP and the functionality of a microcontroller with a flexible set of peripherals to

create an extremely cost-effective solution. Because of its low cost, configuration flexibility, and compact

program code, the 56F803 is well-suited for many applications. The 56F803 includes many peripherals

that are especially useful for applications such as motion control, smart appliances, steppers, encoders,

tachometers, limit switches, power supply and control, automotive control, engine management, noise

suppression, remote utility metering, and industrial control for power, lighting, and automation.

The 56800 core is based on a Harvard-style architecture consisting of three execution units operating in

parallel, allowing as many as six operations per instruction cycle. The MCU-style programming model and

optimized instruction set allow straightforward generation of efficient, compact device and control code.

The instruction set is also highly efficient for C compilers to enable rapid development of optimized

control applications.

The 56F803 supports program execution from either internal or external memories. Two data operands can

be accessed from the on-chip Data RAM per instruction cycle. The 56F803 also provides two external

dedicated interrupt lines, and up to 16 General Purpose Input/Output (GPIO) lines, depending on

peripheral configuration.

The 56F803 controller includes 31.5K words (16-bit) of Program Flash and 4K words of Data Flash (each

programmable through the JTAG port) with 512 words of Program RAM and 2K words of Data RAM. It

also supports program execution from external memory.

A total of 2K words of Boot Flash is incorporated for easy customer-inclusion of field-programmable

56F803 Technical Data, Rev. 16

Freescale Semiconductor

5

Share Link: