ADP3160 View Datasheet(PDF) - Analog Devices
Part Name
Description
Manufacturer
ADP3160 Datasheet PDF : 16 Pages
| |||
ADP3160/ADP3167
ABSOLUTE MAXIMUM RATINGS*
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +15 V
CS+, CS– . . . . . . . . . . . . . . . . . . . . . . –0.3 V to VCC + 0.3 V
All Other Inputs and Outputs . . . . . . . . . . . . –0.3 V to +10 V
Operating Ambient Temperature Range . . . . . . . 0∞C to 70∞C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . 125∞C
Storage Temperature Range . . . . . . . . . . . . –65∞C to +150∞C
JA
Two-Layer Board . . . . . . . . . . . . . . . . . . . . . . . . . . 125∞C/W
Four-Layer Board . . . . . . . . . . . . . . . . . . . . . . . . . . 81∞C/W
Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . . 300∞C
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . 215∞C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220∞C
*This is a stress rating only; operation beyond these limits can cause the device to
be permanently damaged. Unless otherwise specified, all voltages are referenced
to GND.
PIN CONFIGURATION
VID4 1
16 VCC
VID3 2
15 REF
VID2 3 ADP3160/ 14 CS–
VID1 4 ADP3167 13 PWM1
TOP VIEW
VID0 5 (Not to Scale) 12 PWM2
COMP 6
11 CS+
FB 7
10 PWRGD
CT 8
9 GND
PIN FUNCTION DESCRIPTIONS
Pin Mnemonic Function
1–5 VID4–
VID0
6 COMP
7 FB
8 CT
9 GND
10 PWRGD
11 CS+
12 PWM2
13 PWM1
14 CS–
15 REF
16 VCC
Voltage Identification DAC Inputs.
These pins are pulled up to an internal
reference, providing a Logic 1 if left open.
The DAC output programs the FB regula-
tion voltage from 1.1 V to 1.85 V. Leaving
all five DAC inputs open results in the
ADP3160/ADP3167 going into a “No
CPU” mode, shutting off its PWM outputs.
Error Amplifier Output and Compensation
Point. The voltage at this output programs
the output current control level between
CS+ and CS–.
Feedback Input. Error amplifier input for
remote sensing of the output voltage.
External Capacitor CT Connection to
ground sets the frequency of the device.
Ground. All internal signals of the ADP3160/
ADP3167 are referenced to this ground.
Open-Drain Output that signals when the
output voltage is in the proper operating range.
Current Sense Positive Node. Positive input
for the current comparator. The output
current is sensed as a voltage at this pin with
respect to CS–.
Logic-Level Output for Phase 2 Driver
Logic-Level Output for Phase 1 Driver
Current Sense Negative Node. Negative
input for the current comparator.
3.0 V Reference Output
Supply Voltage for the ADP3160/ADP3167.
Model
ADP3160JR
ADP3167JR
ORDERING GUIDE
Temperature
Range
0∞C to 70∞C
0∞C to 70∞C
Package
Description
Narrow Body SOIC
Narrow Body SOIC
Package Option
R-16A (SO-16)
R-16A (SO-16)
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
ADP3160/ADP3167 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
–4–
REV. B
Share Link: 