AKD5386-B-06 View Datasheet(PDF) - Asahi Kasei Microdevices

Part Name

Description

Manufacturer

AKD5386-B-06

AK5386 Evaluation Board Rev.0

Asahi Kasei Microdevices 

ASAHI KASEI

[AKD5386-B]

„ Other jumper pins set up

1. JP2 (CKS1) : Setting of CKS1 pin for AK5386

Please refer to the setting of the AK5386 mode of page 4 Table 3.

H

: CKS1=”H”

L

: CKS1=”L” <Default>

2. JP3 (VA) : Select VA pin for AK5386

VA : Supply from VA connector.

REG : Supply from regulator. In this case, VA connector should be open. <Default>

3. JP4 (VD) : Select VD pin for AK5386

VD : Supply from VD connector.

REG : Supply from regulator. In this case, VD connector should be open. <Default>

4. JP5 (MCLK) : Select master clock of the AK5386.

SHORT : AK4114 supplies MCLK. <Default>

OPEN : PORT1 supplies MCLK.

5. JP6 (TX) : Select TX

OPT : Optical Connector (PORT2) is used. <Default>

BNC : BNC (J3) is used.

6. JP7 (AGND) : Analog ground 1 and Analog ground 2

SHORT : Common. <Default>

OPEN : Separated.

7. JP8 (GND) : Analog ground 1 and Digital ground

SHORT : Common. (The DGND connector can be open.) <Default>

OPEN : Separated. In this case, DGND connector should be 0V.

<KM082300>

-3-

2006/12

Share Link: