APR6016 View Datasheet(PDF) - APLUS INTEGRATED CIRCUITS
Part Name
Description
Manufacturer
APR6016 Datasheet PDF : 24 Pages
| |||
INTEGRATED CIRCUITS INC.--APR6016
Pin
Name
/BUSY
VCCD
VCCA
VSSA
VSSD
NC
Pin No.
28 pin
DIP
21
27
18
12,23
4
5,6,7,
10,19,
20,22
Pad No.
(Die)
Functionality
Busy Output: This active low output is low during either a record playback or
fast forward operation. The pin is tri-stated otherwise. This pin can be
22 connected to an LED to indicate playback/record operation to the user. This pin
can also be connected to an external microcontroller as an indication of the
status of playback record forward or digital operation.
Digital Power Supply: This connection supplies power for all on chip digital
31,32,33
circuitry. This pin should be connected to the 3.0 V power plane through a via.
This pin should also be connected to a 0.1 μF bypass cap as close to the pin
as possible.
19,20
Analog Power Supply: This connection supplies power for all on-chip analog
circuitry. This pin should be connected to the 3.0 V power plane through a via.
This pin should also be connected to a 0.1 uF bypass cap as close to the pin as
possible
11,12,13, Analog Ground: These pins should be connected to the ground plane through
23 24,25 a via. The connection should be made as close to the pin as possible.
4,5
Digital Ground: This pin should be connected to the ground plane through a
via. The connection should be made as close to the pin as possible.
6,7,21,
No Connect: These pins should not be connected to anything on the board.
Connection of these pins to any signal GND or VCC may result in incorrect
27,28 device behavior or cause damage to the device.
Electrical Characteristics
The following tables list Absolute Maximum
Ratings,recommended DC Characteristics, and
recommend AC Characteristics for the APR6016
device.
Absolute Maximum Ratings
Stresses greater than those listed in Table 4 may
cause permanent damage to the device. These
specifications represent a stress rating only.
Operation of the device at these or any other
conditions above
those specified in the recommended DC
Characteristics or recommended AC
Characteristics of this specification is not implied.
Maximum condition for extended periods may
affect reliability.
Table 4 Absolute Maximum Ratings.
Item
Symbol
Condition
Min
Power Supply voltage
VCC
TA = 25°C
- 0.3
Input Voltage
TA = 25°C
VIN
Device VCC = 3.0 V
- 0.3
Storage Temperature
TSTG
--
- 65
Temperature Under Bias TBS
--
- 65
Lead Temperature
TLD
< 10s
Max
7.0
5.5
150
125
300
Unit
V
V
°C
°C
°C
http://www.aplusinc.com.tw
17 / 24
TEL : 886-2-2782-9266 ver1.4
Share Link: 