AT87C5112 View Datasheet(PDF) - Atmel Corporation

Part Name

Description

Manufacturer

AT87C5112

8-bit Microcontroller with A/D Converter

Atmel Corporation 

Features

• 80C51 Compatible

– Five I/O Ports

– Two 16-bit Timer/Counters

– 256 Bytes RAM

• 8K Bytes ROM/OTP Program Memory with 64 Bytes Encryption Array and 3 Security

Levels

• High-Speed Architecture

– 33 MHz at 5V (66 MHz Equivalent)

– X2 Speed Improvement Capability (6 Clocks/Machine Cycle)

• 10-bit, 8 Channels A/D Converter

• Hardware Watchdog Timer with Reset-out

• Programmable I/O Mode: Standard C51, Input Only, Push-pull, Open Drain

• Asynchronous Port Reset

• Full Duplex Enhanced UART with Baud Rate Generator

• SPI, Master Mode

• Dual System Clock

– Crystal or Ceramic Oscillator (33/40 MHz)

– Internal RC Oscillator (12 MHz)

– Programmable Prescaler

• Programmable Counter Array with High-speed Output, Compare/Capture, Pulse Width

Modulation and Watchdog Timer Capabilities

• Interrupt Structure

– 8 Interrupt Sources

– 4 Interrupt Priority Levels

• Power Control Modes

– Idle Mode

– Power-down Mode

– Power-off Flag

• Power Supply: 2.7 - 5.5V

• Temperature Range: Industrial (-40 To 85°C)

• Package: LQFP48 (Body 7*7*1.4 mm), PLCC52

8-bit

Microcontroller

with A/D

Converter

AT80C5112

AT83C5112

AT87C5112

Description

The AT8xC5112 is a high performance ROM/OTP version of the 80C51 8-bit

microcontroller.

The AT8xC5112 retains all the features of the standard 80C51 with 8 Kbytes

ROM/OTP program memory, 256 bytes of internal RAM, a 8-source, 4-level interrupt

system, an on-chip oscillator and two timer/counters.

The AT8xC5112 is dedicated for analog interfacing applications. For this, it has a 10-

bit, 8 channels A/D converter and a five channels Programmable Counter Array.

In addition, the AT8xC5112 has a Hardware Watchdog Timer, a versatile serial chan-

nel that facilitates multiprocessor communication (EUART) with an independent baud

rate generator, a SPI serial bus controller and a X2 speed improvement mechanism.

The X2 feature allows to keep the same CPU power at a divided by two oscillator

frequency.

The fully static design of the AT8xC5112 allows to reduce system power consumption

by bringing the clock frequency down to any value, even DC, without loss of data.

Rev. 4191C–8051–02/08

Share Link: