AT89C55WD-33AU View Datasheet(PDF) - Atmel Corporation

Part Name

Description

Manufacturer

AT89C55WD-33AU

8-bit Microcontroller with 20K Bytes Flash

Atmel Corporation 

Features

• Compatible with MCS®-51 Products

• 20K Bytes of Reprogrammable Flash Memory

• Endurance: 10,000 Write/Erase Cycles

• 4V to 5.5V Operating Range

• Fully Static Operation: 0 Hz to 33 MHz

• Three-level Program Memory Lock

• 256 x 8-bit Internal RAM

• 32 Programmable I/O Lines

• Three 16-bit Timer/Counters

• Eight Interrupt Sources

• Programmable Serial Channel

• Low-power Idle and Power-down Modes

• Interrupt Recovery from Power-down Mode

• Hardware Watchdog Timer

• Dual Data Pointer

• Power-off Flag

• Green (Pb/Halide-free) Packaging Option

1. Description

The AT89C55WD is a low-power, high-performance CMOS 8-bit microcontroller with

20K bytes of Flash programmable read only memory and 256 bytes of RAM. The

device is manufactured using Atmel’s high-density nonvolatile memory technology

and is compatible with the industry standard 80C51 and 80C52 instruction set and

pinout. The on-chip Flash allows the program memory to be user programmed by a

conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU

with Flash on a monolithic chip, the Atmel AT89C55WD is a powerful microcomputer

which provides a highly flexible and cost effective solution to many embedded control

applications.

The AT89C55WD provides the following standard features: 20K bytes of Flash, 256

bytes of RAM, 32 I/O lines, three 16-bit timer/counters, a six-vector, two-level interrupt

architecture, a full-duplex serial port, on-chip oscillator, and clock circuitry. In addition,

the AT89C55WD is designed with static logic for operation down to zero frequency

and supports two software selectable power saving modes. The Idle Mode stops the

CPU while allowing the RAM, timer/counters, serial port, and interrupt system to con-

tinue functioning. The Power-down Mode saves the RAM contents but freezes the

oscillator, disabling all other chip functions until the next external interrupt or hardware

reset.

8-bit

Microcontroller

with 20K Bytes

Flash

AT89C55WD

1921D–MICRO–6/08

Share Link: