ATF22V10C-10JI View Datasheet(PDF) - Atmel Corporation

Part Name

Description

Manufacturer

ATF22V10C-10JI

High Performance E2 PLD

Atmel Corporation 

Description

The ATF22V10C is a high performance CMOS (Elec-

trically Erasable) Programmable Logic Device (PLD)

which utilizes Atmel’s proven electrically erasable

Flash memory technology. Speeds down to 5 ns and

power dissipation as low as 100 µA are offered. All

speed ranges are specified over the full 5V ± 10%

range for industrial temperature ranges, and 5V ± 5%

for commercial temperature ranges.

Several low power options allow selection of the best so-

lution for various types of power-limited applications. Each

of these options significantly reduces total system power

and enhances system reliability.

Absolute Maximum Ratings*

Temperature Under Bias................... -40°C to +85°C

Storage Temperature...................... -65°C to +150°C

Voltage on Any Pin with

Respect to Ground........................ -2.0V to +7.0V (1)

Voltage on Input Pins

with Respect to Ground

During Programming................... -2.0V to +14.0V (1)

Programming Voltage with

Respect to Ground...................... -2.0V to +14.0V (1)

*NOTICE: Stresses beyond those listed under “Absolute Maxi-

mum Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of the

device at these or any other conditions beyond those indi-

cated in the operational sections of this specification is not

implied. Exposure to absolute maximum rating conditions

for extended periods may affect device reliability.

Note:

1. Minimum voltage is -0.6V dc, which may undershoot to -2.0V

for pulses of less than 20 ns. Maximum output pin voltage is

VCC + 0.75V dc, which may overshoot to 7.0V for pulses of

less than 20 ns.

DC and AC Operating Conditions

Operating Temperature (Case)

VCC Power Supply

Commercial

0°C - 70°C

5V ± 5%

Industrial

-40°C - 85°C

5V ± 10%

2

ATF22V10C

Share Link: