ATP25ASM View Datasheet(PDF) - CTS Corporation

Part Name

Description

Manufacturer

ATP25ASM

Standard Crystals

CTS Corporation 

PACKAGING INFORMATION

DIMENSIONS IN MILLIMETERS

4.0

12.0

Ø1.50

11.5

1.75

3.9

24.0

ATP-SM

Low Cost Quartz Crystal

25.5

Ø13.0

120°

2.0

Ø100 Ø330

4.0

DIRECTION OF FEED

Device quantity is 1,000 pieces per reel.

Ø21.0

ENVIRONMENTAL SPECIFICATIONS

Temperature Cycle:

400 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1

minute transfer time between temperatures.

Mechanical Shock:

1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3

mutually perpendicular planes (18 total shocks).

Sinusoidal Vibration:

0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles

each in 3 mutually perpendicular planes (9 times total).

Gross Leak:

Fine Leak:

No leak shall appear while immersed in an FC40 or equivalent liquid at

+125°C for 20 seconds.

Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent.

Resistance to Solder Heat:

Product must survive 3 reflows of +260°C peak, 10 seconds maximum.

High Temperature Operating Bias:

2,000 hours at +125°C, disregarding frequency shift.

Frequency Aging:

1,000 hours at +85°C, maximum ±5 ppm shift.

Insulation Resistance:

Moisture Sensitivity Level:

500M Ohms @ 100VDC ±15VDC.

Level 1 per JEDEC J-STD-020.

QUALITY AND RELIABILITY

Quality systems meet or exceed the requirements of ISO 9000:2000 standards.

Document No. 008-0325-0

Page 4 - 4

٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠

Rev. A

Share Link: