ATTINY85V-10MUR View Datasheet(PDF) - Atmel Corporation

Part Name

Description

Manufacturer

ATTINY85V-10MUR

Atmel 8-bit AVR Microcontroller with 2/4/8K Bytes In-System Programmable Flash

Atmel Corporation 

1. Pin Configurations

Figure 1-1. Pinout ATtiny25/45/85

PDIP/SOIC/TSSOP

(PCINT5/RESET/ADC0/dW) PB5 1

(PCINT3/XTAL1/CLKI/OC1B/ADC3) PB3 2

(PCINT4/XTAL2/CLKO/OC1B/ADC2) PB4 3

GND 4

8 VCC

7 PB2 (SCK/USCK/SCL/ADC1/T0/INT0/PCINT2)

6 PB1 (MISO/DO/AIN1/OC0B/OC1A/PCINT1)

5 PB0 (MOSI/DI/SDA/AIN0/OC0A/OC1A/AREF/PCINT0)

NOTE: TSSOP only for ATtiny45/V

QFN/MLF

(PCINT5/RESET/ADC0/dW) PB5 1

(PCINT3/XTAL1/CLKI/OC1B/ADC3) PB3 2

DNC 3

DNC 4

(PCINT4/XTAL2/CLKO/OC1B/ADC2) PB4 5

15 VCC

14 PB2 (SCK/USCK/SCL/ADC1/T0/INT0/PCINT2)

13 DNC

12 PB1 (MISO/DO/AIN1/OC0B/OC1A/PCINT1)

11 PB0 (MOSI/DI/SDA/AIN0/OC0A/OC1A/AREF/PCINT0)

NOTE: Bottom pad should be soldered to ground.

DNC: Do Not Connect

1.1 Pin Descriptions

1.1.1 VCC

Supply voltage.

1.1.2 GND

Ground.

1.1.3

Port B (PB5:PB0)

Port B is a 6-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The Port B output buffers

have symmetrical drive characteristics with both high sink and source capability. As inputs, Port B pins that are

externally pulled low will source current if the pull-up resistors are activated. The Port B pins are tri-stated when a

reset condition becomes active, even if the clock is not running.

ATtiny25/45/85 [DATASHEET]

2

2586PS–AVR–06/2013

Share Link: