CDB5366(2007) View Datasheet(PDF) - Cirrus Logic
Part Name
Description
Manufacturer
CDB5366 Datasheet PDF : 41 Pages
| |||
CS5366
Pin Name
AIN2+, AIN2-
AIN4+, AIN4-
AIN3+, AIN3-
AIN6+, AIN6-
AIN5+, AIN5-
AIN1+, AIN1-
GND
VA
REF_GND
FILT+
VQ
VX
XTI
XTO
MCLK
Pin #
1,2
11,12
13,14
43,44
45,46
47,48
3,8
10,15
16,17
18,19
29,32
4,9
5
6
7
20
21
22
23
LRCK/FS
24
SCLK
25
TSTO
26
SDOUT2
27
VLS
28
SDOUT1/TDM
30
SDOUT3/TDM
31
VD
33
VLC
35
OVFL
36
RST
41
Stand-Alone Mode
CLKMODE
34
DIF1
37
DIF0
38
M1
39
M0
40
MDIV
42
Pin Description
Differential Analog (Inputs) - Audio signals are presented differently to the delta sigma modula-
tors via the AIN+/- pins.
Ground (Input) - Ground reference. Must be connected to analog ground.
Analog Power (Input) - Positive power supply for the analog section
Reference Ground (Input) - For the internal sampling circuits. Must be connected to analog
ground.
Positive Voltage Reference (Output) - Reference voltage for internal sampling circuits.
Quiescent Voltage (Output) - Filter connection for the internal quiescent reference voltage.
Crystal Oscillator Power (Input) - Also powers control logic to enable or disable oscillator cir-
cuits.
Crystal Oscillator Connections (Input/Output) - I/O pins for an external crystal which may be
used to generate MCLK.
System Master Clock (Input/Output) - When a crystal is used, this pin acts as a buffered MCLK
Source (Output). When the oscillator function is not used, this pin acts as an input for the system
master clock. In this case, the XTI and XTO pins must be tied low.
Serial Audio Channel Clock (Input/Output)
In I²S mode Serial Audio Channel Select. When low, the odd channels are selected.
In LJ mode Serial Audio Channel Select. When high, the odd channels are selected.
In TDM Mode a frame sync signal. When high, it marks the beginning of a new frame of serial
audio samples. In Slave Mode, this pin acts as an input pin.
Main timing clock for the Serial Audio Interface (Input/Output) - During Master Mode, this pin
acts as an output, and during Slave Mode it acts as an input pin.
Test Out (Output) - Must be left unconnected.
Serial Audio Data (Output) - Channels 3,4.
Serial Audio Interface Power - Positive power for the serial audio interface.
Serial Audio Data (Output) - Channels 1,2. TDM.
Serial Audio Data (Output) - Channels 5,6. TDM is complementary TDM data.
Digital Power (Input) - Positive power supply for the digital section.
Control Port Interface Power - Positive power for the control port interface.
Overflow (Output, open drain) - Detects an overflow condition on both left and right channels.
Reset (Input) - The device enters a low power mode when low.
CLKMODE (Input) - Setting this pin HIGH places a divide-by-1.5 circuit in the MCLK path to the
core device circuitry.
DIF1, DIF0 (Input) - Sets the serial audio interface format.
Mode Selection (Input) - Determines the operational mode of the device.
MCLK Divider (Input) - Setting this pin HIGH places a divide-by-2 circuit in the MCLK path to the
core device circuitry.
DS626F2
7
Share Link: 