CY7C1031
CY7C1032
Maximum Ratings
(Above which the useful life may be impaired. For user guide-
lines, not tested.)
Storage Temperature ...................................–65°C to +150°C
Ambient Temperature with
Power Applied ...............................................–55°C to +125°C
Supply Voltage on VCC Relative to GND................ –0.5V to +7.0V
DC Voltage Applied to Outputs
in High Z State[2]...............................................–0.5V to VCC + 0.5V
DC Input Voltage[2] ...........................................–0.5V to VCC + 0.5V
Electrical Characteristics Over the Operating Range[4]
Current into Outputs (LOW)......................................... 20 mA
Static Discharge Voltage .......................................... >2001V
(per MIL-STD-883, Method 3015)
Latch-Up Current .................................................... >200 mA
Operating Range
Range
Com’l
Ambient
Temperature[3]
0°C to +70°C
VCC
5V ± 5%
VCCQ
3.0V to VCC
7C1031-8
7C1032-8
7C1031-10
7C1032-10
7C1031-12
7C1032-12
Parameter
Description
Test Conditions
Min. Max. Min. Max. Min. Max. Unit
VOH
Output HIGH Voltage
VCC = Min.,
IOH = –4.0 mA
VOL
Output LOW Voltage
VCC = Min.,
IOL = 8.0 mA
VIH
Input HIGH Voltage
VIL
Input LOW Voltage[2]
IX
Input Load Current
GND ≤ VI ≤ VCC
IOZ
Output Leakage
GND ≤ VI ≤ VCC,
Current
Output Disabled
2.4 VCCQ 2.4 VCCQ 2.4 VCCQ
V
0.4
0.4
0.4
V
2.2
VCC
2.2
VCC
2.2
VCC
V
+ 0.3V
+ 0.3V
+ 0.3V
–0.3 0.8 –0.3 0.8 –0.3 0.8
V
–1
1
–1
1
–1
1
µA
–5
5
–5
5
–5
5
µA
IOS
Output Short Circuit
Current[5]
VCC = Max., VOUT = GND
–300
–300
–300 mA
ICC
VCC Operating
VCC = Max.,
Com’l
280
280
230 mA
Supply Current
IOUT = 0 mA,
f = fMAX = 1/tCYC
ISB1
Automatic CE
Max. VCC, CS ≥ Com’l
80
80
60
mA
Power-Down
VIH, VIN ≥ VIH or
Current—TTL Inputs
VIN ≤ VIL, f = fMAX
ISB2
Automatic CE
Max. VCC, CS ≥ Com’l
30
30
30
mA
Power-Down Current — VCC – 0.3V, VIN ≥
CMOS Inputs
V0.C3CV,–f0=.30V[6]or VIN ≤
Capacitance[7]
Parameter
Description
Test Conditions
CIN: Addresses
CIN: Other Inputs
Input Capacitance
TA = 25°C, f = 1 MHz,
VCC = 5.0V
Com’l
Com’l
COUT
Output Capacitance
Com’l
Notes:
2. Minimum voltage equals –2.0V for pulse durations of less than 20 ns.
3. TA is the case temperature.
4. See the last page for Group A subgroup testing information.
5. Not more than one output should be shorted at one time. Duration of the short circuit should not exceed 30 seconds.
6. Inputs are disabled, clock is allowed to run at speed.
7. Tested initially and after any design or process changes that may affect these parameters.
Max.
4.5
5
8
Unit
pF
pF
pF
5