LHF32KZ5 View Datasheet(PDF) - Sharp Electronics

Part Name

Description

Manufacturer

LHF32KZ5

Flash Memory 32M (× 8 or ×16)

Sharp Electronics 

sharp

LHF32KZ5

2

LH28F320SKTD-L70

32-MBIT (2MBx8/1MBx16 x2Bank)

Smart3/5 Dual Work Flash MEMORY

■ Dual 16M-bit Banks Enable the

Simultaneous Read/Write/Erase

Operation

■ Smart3/5 Dual Work Technology

2.7V, 3.3V or 5V VCC

2.7V, 3.3V or 5V VPP

■ Common Flash Interface (CFI)

Universal & Upgradable Interface

■ Scalable Command Set (SCS)

■ High Speed Read Performance

70ns(5V±0.25V), 80ns(5V±0.5V),

100ns(3.3V±0.3V), 120ns(2.7V-3.6V)

■ Operating Temperature

0°C to +70°C

■ High Speed Write Performance

32 Bytes x 2 plane Page Buffer

2µs/Byte Write Transfer Rate

■ High-Density Symmetrically-Blocked

Architecture

Sixty-four 64-Kbyte Erasable Blocks

■ Extended Cycling Capability

100,000 Block Erase Cycles

3.2 Million Block Erase Cycles/Bank

■ SRAM-Compatible Write Interface

■ User-Configurable x8 or x16 Operation

■ Enhanced Automated Suspend Options

Write Suspend to Read

Block Erase Suspend to Write

Block Erase Suspend to Read

■ Enhanced Data Protection Features

Absolute Protection with VPP=GND

Flexible Block Locking

Erase/Write Lockout during Power

Transitions

■ Low Power Management

Deep Power-Down Mode

Automatic Power Savings Mode

Decreases ICC in Static Mode

■ Automated Write and Erase

Command User Interface

Status Register

■ Industry-Standard Packaging

56-Lead TSOP

■ ETOXTM* V Nonvolatile Flash

Technology

■ CMOS Process

(P-type silicon substrate)

■ Not designed or rated as radiation

hardened

SHARP’s LH28F320SKTD-L70 Dual Work Flash memory with Smart3/5 technology is a high-density, low-cost,

nonvolatile, read/write storage solution for a wide range of applications. Its symmetrically-blocked architecture,

flexible voltage and extended cycling provide for highly flexible component suitable for resident flash arrays, SIMMs

and memory cards. Its enhanced suspend capabilities provide for an ideal solution for code + data storage

applications. For secure code storage applications, such as networking, where code is either directly executed out

of flash or downloaded to DRAM, the LH28F320SKTD-L70 offers three levels of protection: absolute protection with

VPP at GND, selective hardware block locking, or flexible software block locking. These alternatives give designers

ultimate control of their code security needs.

The LH28F320SKTD-L70 is conformed to the flash Scalable Command Set (SCS) and the Common Flash

Interface (CFI) specification which enable universal and upgradable interface, enable the highest system/device

data transfer rates and minimize device and system-level implementation costs.

The LH28F320SKTD-L70 is manufactured on SHARP’s 0.4µm ETOXTM* V process technology. It come in industry-

standard package: the 56-Lead TSOP, ideal for board constrained applications.

*ETOX is a trademark of Intel Corporation.

Share Link: