DS1629 View Datasheet(PDF) - Dallas Semiconductor -> Maxim Integrated

Part Name

Description

Manufacturer

DS1629

2-Wire Digital Thermometer and Real Time Clock

Dallas Semiconductor -> Maxim Integrated 

DS1629 FUNCTIONAL BLOCK DIAGRAM Figure 1

DS1629

OPERATION-Measuring Temperature

The DS1629 measures temperature through the use of an on-chip temperature measurement technique

with an operating range from -55°C to +125°C. The device can be configured to perform a single

conversion, store the result, and return to a standby mode or it can be programmed to convert

continuously. Regardless of the mode used, the last completed digital temperature conversion is retrieved

from the temperature register using the Read Temperature (AAh) protocol, as described in detail in the

“Command Set” section. Details on how to change the settings after power-up are contained in the

“OPERATION-Configuration” section.

The DS1629 measures temperature by counting the number of clock cycles that an oscillator with a low

temperature coefficient goes through during a gate period determined by a high temperature coefficient

oscillator. The counter is preset with a base count that corresponds to -55°C. If the counter reaches 0

before the gate period is over, the temperature register, which is also preset to the -55°C value, is

incremented, indicating that the temperature is higher than -55°C.

4 of 22

102299

Share Link: