APE17024 View Datasheet(PDF) - APLUS INTEGRATED CIRCUITS

Part Name

Description

Manufacturer

APE17024

very low cost voice and melody synthesizer with 4-bits CPU

APLUS INTEGRATED CIRCUITS 

APExx24 Series

1.0 General Description

The APExx24 series are very low cost voice and melody synthesizer with 4-bits CPU. They have various

features including 4-bits ALU, ROM, RAM, I/O ports, timers, clock generator, voice and melody

synthesizer, and PWM (Direct drive) or D/A current outputs, etc. The audio synthesizer contains one

voice-channel and two melody-channels. Furthermore, they consist of 27 instructions in these devices.

With CMOS technology and halt function can minimize power dissipation. Their architectures are similar

to RISC, with two stages of instruction pipeline. They allow all instructions to be executed in a single

cycle, except for program branches and data table read instructions (which need two instruction cycles).

2.0 Features

(1) Single power supply can operate from 2.4V to 5.5V at 4MHz or 8MHz.

(2) Program ROM: 64k x 10 bits

(3) 1 set of 16-bits DPR can access up to 64k x 10 bits melody data memory space, and 1 set of 20-bits

VPR can access up to 1024k x 10 bits voice data memory space.

Product

APE12724

APE17024

APE25524

APE34024

Voice Duration (sec) Voice Pointer (VPR) ROM Size (10-bits)

127

19-bits

384k

170

19-bits

512k

255

20-bits

768k

340

20-bits

1024k

(4) Data Registers:

a). 128 x 4-bits data RAM (00-7Fh)

b). Unbanked special function registers (SFR) range: 00h-2Fh

(5) I/O Ports:

a). PRA: 4-bits I/O Port A (10h) can be programmed to input/output individually. (Register control)

b). PRB: 4-bits I/O Port B (13h) can be configured to input/output individually. (Mask option)

c). PRC: 4-bits I/O Port C (14h) can be programmed to input/output individually. (Register control)

d). PRD: 4-bits I/O Port D (15h) can be programmed to input/output individually. (Register control)

e). PRE: 4-bits I/O Port E (17h) can be programmed to input/output individually. (Register control)

f). PRF: 4-bits I/O Port F (18h) can be programmed to input/output individually. (Register control)

(6) On-chip clock generator: Resistive Clock Drive (RM) or Crystal oscillator (HM)

(7) Timer: 1-set Voice Interrupt (Timer0: a 9-bits auto-reload timer/counter).

(8) Stack: 2-level subroutine nesting.

(9) Built-in 4 Level Volume Control can be programmed.

(10) Built-in 8 Level DAC Current Control can be configured. (Mask option)

(11) Built-in IR Carry Output: Port B[1] can be configured as IR pin by 38k / 56kHz. (Mask option)

1

Rev 1.1

2003/9/2

Share Link: